Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

SmartSDR for Windows - Koss SB-45 headset

W8QB
W8QB Member ✭✭
edited February 2020 in FLEX-6000 Signature Series
Others have spoken favorably about the Koss SB-45 headset.  This headset comes in two models: one headset connects to the laptop via 3.5mm plugs.  The other SB-45 connects to the computer's USB port.  I would prefer to buy that USB version. Would the USB version introduce noticeable latency when connecting to SmartSDR for Windows?

Answers

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited February 2020
    It will incur latency because the audio has to route from the radio to the PC, through the Windows audio subsystem to the headset.  Whether this is delay objectional is relative.  If you are chasing DX or contesting and do not want the extra 50-150ms of latency from the time you speak until it is sent as RF, then it might be objectional.  If you are ragchewing, then it probably will not be very objectional.
  • Mark Erbaugh
    Mark Erbaugh Member ✭✭
    edited March 2018
    Wouldn’t the 3.5mm plug have a similar latency when plugged into the laptop as the audio would still have to go from the radio and PC and audio subsystem?
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2018
    Mark - Yes.

    However, Doug has a 6400M, so the 1/8" mic and headphone connectors should connect to directly to the radio without the need for adapters. This is the preferred way to connect a headset

    Regardless if the interface is direct to the sound card or a USB port, essentially the same latency (maybe a little more on the USB) is in play when connecting to a PC rather than directly to the radio.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.