SmartSDR and Easypal

  • 1
  • Question
  • Updated 3 years ago
  • Answered
Is there any new information on selecting RX and TX ports in EASYPAL? DAX RX and DAX TX do not show up in the EASYPAL setup. 
Photo of W3EX -- Tom

W3EX -- Tom

  • 71 Posts
  • 14 Reply Likes

Posted 3 years ago

  • 1
Photo of Alex - DH2ID

Alex - DH2ID, Elmer

  • 974 Posts
  • 180 Reply Likes
Happy new year, Tom!

EasyPAL newest edition October 2014
http://www.vk3evl.com/index.php?option=com_content&view=article&id=57:easypal-downloads&...

I run EasyPAL like this:



You see that DAX Audio TX shows, but DAX Audio RX1 doesn't in this list of 11 soundcards!
No problem: Just select DAX channel 2 both in the slice and the DAX control panel and set
EasyPAL to DAX Audio RX 2.

Hope this works,

73, Alex - DH2ID
(Edited)
Photo of W3EX -- Tom

W3EX -- Tom

  • 71 Posts
  • 14 Reply Likes
Yes that did work for receive. How about TX?
Thanks very much.
Photo of Alex - DH2ID

Alex - DH2ID, Elmer

  • 974 Posts
  • 180 Reply Likes
You need a PTT port in SmartSDR CAT which you can set in EasyPAL like this:



Sorry that it is in German, but you surely can get the right
settings.

My PTT port is always 7.

73, Alex - DH2ID
Photo of Ray Gustafson WB0HHM

Ray Gustafson WB0HHM

  • 20 Posts
  • 1 Reply Like
I having the same problem with receive audio not getting to Easypal . 
I have DAX set to channel 2 and can see the audio on the DAX popup
but not getting any audio into Easypal , tried different version of Easypal
using Win10 , but have tried on another computer with Win 7 and still I can't get to work
I can get transmit to work using VOX as I haven't got to setting up the Cat control for Easypal yet. 
I had easypal working on my Flex 3000 when I had it. 

I can get  Fldigi to work Ok  

                                                                 Ray WB0HHM 
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9186 Posts
  • 3548 Reply Likes
"I can get  Fldigi to work Ok"

At least that narrows down the troubleshooting to Easypal
Photo of Ray Gustafson WB0HHM

Ray Gustafson WB0HHM

  • 20 Posts
  • 1 Reply Like
Yes it seems that way, the fellows above seem to have it working , maybe a setting in Easypal that I am missing?
Photo of W3EX -- Tom

W3EX -- Tom

  • 71 Posts
  • 14 Reply Likes
This is very similar to my experience with my 6500 and easypal. I have given up at this point. Fldigi, HRD etc all work well.
Photo of Ray Gustafson WB0HHM

Ray Gustafson WB0HHM

  • 20 Posts
  • 1 Reply Like
Tom thanks for the information What version of HRD do you have and will it do what Easypal does?
Photo of W3EX -- Tom

W3EX -- Tom

  • 71 Posts
  • 14 Reply Likes
HRD does not do what easypal does. I was just saying that I could set up HRD to work fine. I think there is something strange in Easypal that does not show all of the DAX circuits.
Photo of AA0KM

AA0KM

  • 356 Posts
  • 65 Reply Likes

USE KENWOOD enter commport from Smartsdr Cat that uses PTT

Photo of AA0KM

AA0KM

  • 356 Posts
  • 65 Reply Likes

This always pops up and is not a concern .This does not stop the operation just click ok and go.

It will happen everytime you use Easypal.

Photo of AA0KM

AA0KM

  • 356 Posts
  • 65 Reply Likes

Photo of Ray Gustafson WB0HHM

Ray Gustafson WB0HHM

  • 20 Posts
  • 1 Reply Like
I finally got it to work the information from AA0KM did it for me  Thanks   Mary