SmartSDR 2.0 Busted Me

  • 1
  • Praise
  • Updated 12 months ago

I went through the steps for updating my 6300 remote controlling a computer from work via OpenVPN, got all the way to registering and bam, it wants me to power cycle the radio.... I'm at work so I have to wait until I get home. Of course this makes perfect sense and I tried to cheat, so now I have to wait until I get home.

Dagnab it. :)  So much for playing with Smartlink during lunch!!

Photo of KC9NRN

KC9NRN

  • 324 Posts
  • 32 Reply Likes

Posted 12 months ago

  • 1
Photo of Mike va3mw

Mike va3mw

  • 824 Posts
  • 195 Reply Likes
You will also need to be able to push the PTT switch on the radio while at the radio to complete your reservation.  So, there is a double wamy.  That is a security feature.

:)
Photo of KC9NRN

KC9NRN

  • 324 Posts
  • 32 Reply Likes
Yep, like I said, it busted me. It's fine, I'll get to play when I get home, I'll test through my laptop and a mifi.
Photo of Matt (K0KB)

Matt (K0KB)

  • 58 Posts
  • 12 Reply Likes
I registered mine almost immediately after release this morning from my office.  Maestro running in my office next to my monitors and calculator.

I simply switched the remote relay from my remote on port to the PTT port Sunday in advance of the release and then remote activated the relay I would normally use to remote power the station on. ;)