Smartlink set up

  • 1
  • Question
  • Updated 6 months ago
  • Answered
Flex 600, Version 2 software,  Maestro,  PC with W10.   Version 2 upgrade carried out and everything seems to be working normally so far.  However when trying to set up Smartlink I am not seeing the Smartlink Log-in menu after selecting the Radio page and 'Log In'.  The window indicates 'loading'  but never brings up the menu.   As an aside, in case relevant, I have the radio and maestro connected to PC through network switch and PC connected to internet by wifi but have set up a bridge between both which appears to be working ok.  Any thoughts on what to try next appreciated.
Photo of Mal G3PDH

Mal G3PDH

  • 43 Posts
  • 2 Reply Likes

Posted 6 months ago

  • 1
Photo of Mal G3PDH

Mal G3PDH

  • 43 Posts
  • 2 Reply Likes
correction to above post  Radio is Flex 6500
Photo of Mal G3PDH

Mal G3PDH

  • 43 Posts
  • 2 Reply Likes
Further comment UPnP is 'ON' in my router
Photo of Mal G3PDH

Mal G3PDH

  • 43 Posts
  • 2 Reply Likes
I may have resolved it so will advise again if assistance needed.

This conversation is no longer open for comments or replies.