Smartlink Issue

  • 1
  • Problem
  • Updated 5 months ago
  • Solved
I can no longer see Smart link on my IPAD or a windows computer Remote. I however can log in fine. In the Settings on the IOS i tested the connection using the button and it looks good but no Radio. The Radio Works fine over the LAN but not Remote. Help
Photo of Craig Greer

Craig Greer

  • 5 Posts
  • 0 Reply Likes

Posted 5 months ago

  • 1
Photo of Jim Gilliam

Jim Gilliam

  • 851 Posts
  • 175 Reply Likes

Be sure and run the network test. You need to get a green circle. If you get red, try resetting your router or removing power from your radio and recycle.  


Jim, K6QE

Photo of KK9W - Steve

KK9W - Steve

  • 632 Posts
  • 189 Reply Likes
I am having the same issue here. All tests give a green OK but trying to connect I get
" No response from server"
Photo of JohnSweeney

JohnSweeney

  • 47 Posts
  • 2 Reply Likes
It appears that SmartLink server is down. 
Photo of Steve

Steve

  • 53 Posts
  • 26 Reply Likes
I had the same problem a while back, rebooted the router and the radio and all was well. According to Flex it was something to do with what they call "Jumbo" packets.  There is a ticket open BUT as always you cannot tell what the damned status is.
Photo of JohnSweeney

JohnSweeney

  • 47 Posts
  • 2 Reply Likes
Issue fixed - local problem
Photo of Craig Greer

Craig Greer

  • 5 Posts
  • 0 Reply Likes
All i get a a green dot and i everything appears fine but no Station on the Smart-link.  I will Try Rebooting the Router i have done a full power removed from the radio Reboot everything works fine except the Remote Smart-Link.
Photo of JohnSweeney

JohnSweeney

  • 47 Posts
  • 2 Reply Likes
Please make sure your Flex has a fixed IP address on your LAN.  If the Flex IP changes and you have opened ports in your router set to the old IP, it will not connect.  Use a static IP in your Flex.
Photo of Craig Greer

Craig Greer

  • 5 Posts
  • 0 Reply Likes
Well since we have been discussing this it seems that i was magically unlocked (It was locked up on their side) And now everything appears i just have a configuration issue now with ports. I forwarded everything per the instructions but i have had a firmware update on my Router and a Windows update so some where in there the issue started. Now to fine that problem and good to go. 
Photo of Craig Greer

Craig Greer

  • 5 Posts
  • 0 Reply Likes
Thank you magical Person ----------

This conversation is no longer open for comments or replies.