Smartlink | FlexRadio Community

I wonder if anyone else has had any issues with using a Maestro on Smartlink with 2.2.8 software. After updating to 2.2.8 I have experienced very flakey performance on remote via smartlink on links which had previously worked ok. The Maestro itself works fine when connected by ethernet and when on my local wifi. I find that SDR ios on the ipad is working ok on these same remote links but Maestro will not perform properly and will lock up. Sound comes through but the spectrum display shows as per picture below.

Comments appreciated from other remote users running 2.2.8
Image: https://d2r1vs3d9006ap.cloudfront.net/s3_images/1732718/RackMultipart20180529-66755-71ej5i-P1010204_REDUCED_inline.JPG?1527625685

Image: https://d2r1vs3d9006ap.cloudfront.net/s3_images/1732718/RackMultipart20180529-66755-71ej5i-P1010204_REDUCED_inline.JPG?1527625685

Mal G3PDH

48 Posts
2 Reply Likes

Posted 7 months ago

6 months ago

Andrew Russell

263 Posts
34 Reply Likes

i have this problem also with SSDR 2.2.8 on my WIN10 tablet. IOS app is fine on ipad and iphone.
Using the same 4G hotspot. Low BW makes no difference.
Andrew VK5CV.

Comment

6 months ago

Steve

54 Posts
28 Reply Likes

Download 2.3.7...there have been improvements made to Smartlink..

Comment

2018-06-28T22:27:10+00:00

Andrew Russell

263 Posts
34 Reply Likes

Thanks Steve.
I have been out of town since before 2.3.7.
So that will need to wait.
Andrew VK5CV