Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Smart SDR CAT with older model of SteppIR control box

Ilmo Anttila
Ilmo Anttila Member ✭✭
edited April 2019 in FLEX-6000 Signature Series
My Flex 6500 works fine and USB cable controls my Expert 1K-FA. I tried to connect also my SteppIR using the older control box model in parallel. This connection did not work.
Is it available any solution to get also this box to change band and band slot via USB cable?

Answers

  • Mike va3mw
    Mike va3mw Member ✭✭
    edited February 2018
    Can you describe a little better how you have this connected?  The Steppir controller just listens to frequency commands from the radio/etc.  

    If there are no communications from the radio, then the Steppir won't track.   

    Essentially, the Steppir is connected on the Data out port, not the Data In.

    Can you draw a diagram, take a picture of it and post it?  That would really help.

    Mike va3mw
  • Felice, IZ8FFA
    edited March 2017
    Hi Ilmo, do have used a FTDI cable and is connected to FluidMotion with a Null-Modem cable? My SteppIr FM work as well.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.