Slice controls unstable

  • 1
  • Problem
  • Updated 5 years ago
Running 1.05 on the 6700. Two pans open and three slices, two on top and one on bottom. The controls for Slice A are only half working. I can reduce settings but not increase them. I can drag the slice volume lower but not higher; clicking to the right of the circle in the slider sometimes brings down the mode options. Also cannot bring the balance control to the right or the AGC threshold. If I click on the circle on the threshold I get the default AGC choices of fast medium or slow. THe other slice controls work fine.

73
Greg
Photo of Greg

Greg

  • 656 Posts
  • 63 Reply Likes

Posted 5 years ago

  • 1
Photo of K2CM

K2CM

  • 265 Posts
  • 18 Reply Likes
I experienced some intermittent issues relating to the "filter box" moving from right to left by itself and could not select different filter settings (on the original slice). 3 slices active.

I restarted SmartSDR and all was normal. No problem since.
Photo of Greg

Greg

  • 656 Posts
  • 63 Reply Likes
Closing the slice and opening another resumed normal behavior. No big deal but something caused it to happen.

This conversation is no longer open for comments or replies.