Slice Switching

  • 2
  • Idea
  • Updated 4 years ago
  • (Edited)
Slice Identification Switching

Re Posting My Idea from several months ago

As most of us know there are many reasons that it would be convenient 
if we could change the Rx Slice Identification. 
IE: Switch (A) with (D). 
This applies to 3rd party software where it only looks for Radio 1 or 2, 
which relates to Rx (A) and (B). 
My suggestion is to provide the ability to RIGHT click on say the 
(A) in the Rx A Flag and it would then either start Flashing or change color. 
Then RIGHT click on say the 
(D) in the Rx D Flag. 
The SSDR would then switch the A and D Identification on each Flag.. 
Everything else would Stay the same... 


Ken W9IE
Photo of Ken W9IE

Ken W9IE

  • 89 Posts
  • 17 Reply Likes

Posted 4 years ago

  • 2
Photo of Brian - W9HLQ

Brian - W9HLQ

  • 50 Posts
  • 15 Reply Likes
This would be nice if I find a station on the "C" slice and wish to move it to the "A" slice to activate tracking with logging or the "S" meter.  
Photo of WA6FXT Mike

WA6FXT Mike

  • 207 Posts
  • 37 Reply Likes
My idea would be a little simpler... Right Click on the Slice's Letter Flag, as you suggest, then select the SWAP with A button.

So, if you find somebody on slice 'D' you want to contact, you Right-Click on 'D's flag letter and select the Swap with A button and A and D are swapped.

This makes it a single action operation.

Mike