slice-master not working

  • 1
  • Question
  • Updated 3 months ago
  • Answered
updated software this afternoon. Now slice-master is not bring up cw skimmer or spots. Went over every thing dozen time, must be missing something. I slice- master set for" telnet://ve7cc.net/". It doesn't show any spots. Worked fb before upgrading with cw skimmer . Any hints? ( Using a 6600/m)

Don...w2xb
Photo of Don

Don

  • 77 Posts
  • 5 Reply Likes

Posted 3 months ago

  • 1
Photo of K1DBO

K1DBO

  • 416 Posts
  • 73 Reply Likes
Don,

I'm confused about the changes you made between when it was working and now.

If it's just that CW Skimmer is not starting, take a look at the Slice Master status area.  Just click there then let the mouse hover.  You should a pop-up with the last few status messages.  If you have anything wrong, like DAX not being enabled for example, there will be a message in the pop up telling you what needs to be fixed.

--Don
Photo of Bill -VA3WTB

Bill -VA3WTB

  • 2769 Posts
  • 610 Reply Likes
Don, what does it mean when it say warning, time is not in talerence?
Photo of K1DBO

K1DBO

  • 416 Posts
  • 73 Reply Likes
Bill,

When Slice Master starts up it compares your system's time to a time source on the internet.  If the two differ by more than a second the warning is generated. The warning was added to help out the folks who have trouble with WSJT-X decodes.  My guess is that if you tried WSJT-X, you'd have some trouble.

--Don