Setup for WSJT-X on iMAC | FlexRadio Community

I have WSJT-X v1.8.0 installed and working on windows pc, new mode FT8 fantastic!!!
Tried to install WSJT-X on my new iMAC, program installs (including block memory) ok, however setup causing problems, under Settings > Radio > Rig, setup page shows dropdown selection for FlexRadio 6xxx so assume it should be possible, but I don't seem to be able to crack it. Has anyone managed to work WSJT-X under "macOS Sierra" with their 6500+Maestro system? I don't want to install windows on my iMAC. Any ideas?

Andrew Rose

32 Posts
1 Reply Like
Hopefull

Posted 2 years ago

2 years ago

Rick, K7FYI

20 Posts
2 Reply Likes

I'm also trying to set up WSJT-X on my Mac and have rig control working, but I'm pointing it to the IP address of my PC and a TCP port I set up for it within SmartCAT. Presumably I could also use xCAT on the Mac to set up a port, but this is working.

In WSJT-X, my rig is set to FlexRadio 6xxx, network server is 192.168.X.XXX:5002 (the IP and port number on my PC where SmartSDR / SmartCAT are running). CAT, Data/Pkt and Fake It are checked.

My issue is with audio. xDAX is getting audio from the radio but can't figure out how to get the audio into WSJT-X on the Mac. Hoping for input here: https://community.flexradio.com/flexradio/topics/dax-and-cat-applications-now-available-for-macos

Rick

Comment

2 years ago

George Molnar, KF2T, Elmer

1664 Posts
612 Reply Likes

Andrew, if you’re using a Mac-only solution, xCAT (see Rick’s post above) fills the bill wonderfully.

Rick, for audio, you will need a virtual sound card app, like Loopback, to make use of xDAX. Create sound cards in Loopback (I call mine DAX TX, DAX1, and DAX2 - creative, huh?) It might also be easier to use Dogpark SDR instead of running a PC for SSDR.

Comment

2017-07-16T00:07:49+00:00

Rick, K7FYI

20 Posts
2 Reply Likes

Thanks, George. Got it working - testing the trial version of Loopback and the freeware Soundflower. My use is a little different... I've got a 6300, so 2 slices... I'm using 2 computers so I can offload some of the processing as my PC wasn't keeping up with all of the decodes across 4 instances of WSJT_X for FT8 / JT65 / JT9 + JTAlert + SSDR + other stuff.

I have slice A tuned to 14.074 with the passband opened up to 5k+. That gets me FT8 on the WSJT-X instance running on the PC, and it gets me JT65 & most of JT9 on the WSJT-X instance running on the Mac. Ditto for another band in Slice B.

2018-10-18T23:53:23+00:00

steven

16 Posts
2 Reply Likes

Rick,

I'm using a MAC only solution. I've downloaded WSJT-X V2.0.0-rc3 along with Xcat. I've gone through the basic but it still won't connect? I'm missing something! Any beginner guide you would recommend? Thanks! Steven

2018-10-19T01:35:05+00:00

Ted VE3TRQ

520 Posts
188 Reply Likes

This thread discusses Fldigi more than it does WSJT-X, but it apples to both.

Sorry - forgot to add the link: https://community.flexradio.com/flexr... and this: https://community.flexradio.com/flexr...

(Edited)