rtty audio problem

  • 1
  • Question
  • Updated 3 years ago
  • Doesn't Need an Answer
using flex 6500, version 1.5. In rtty mode I do not hear the audio of the signal that I'm copying. What am I doing wrong?? Got the operator error.
Photo of jim

jim

  • 27 Posts
  • 3 Reply Likes

Posted 3 years ago

  • 1
Photo of km9r.mike

km9r.mike

  • 425 Posts
  • 62 Reply Likes
That is just normal receive audio. Upper right of SSDR display is master audio control for either headset or speakers. There are also audio controls found within the slice control window. If you right click the speaker icon within the slice control window it will mute the slice. Hope that helps.
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9152 Posts
  • 3478 Reply Likes
Do you have the slice or master volume turned down?
Photo of jim

jim

  • 27 Posts
  • 3 Reply Likes

All audio controls are set as normal.  Nothing turned down or muted.


Photo of km9r.mike

km9r.mike

  • 425 Posts
  • 62 Reply Likes
If receive audio is normal for all other modes except for rtty, I am at a loss because I do not know what can cause a total loss of audio except the above.
Photo of jim

jim

  • 27 Posts
  • 3 Reply Likes

I knew it was operator error, and it was.  Thanks for the replys

Jim



This conversation is no longer open for comments or replies.