RTL-SDR with KE9NS PSDR?

  • 1
  • Question
  • Updated 2 years ago
  • Answered
Slightly off topic,
but I just received a new RTL-SDR dongle....just for fun.

https://www.amazon.com/dp/B011HVUEME/...

It was roughly $25 with the antennas. ( $20 without) in a metal case with SMA antenna connector.

It works pretty well and will do HF via direct sampling without needing any modification or upconverters.

My question....
Has anyone interfaced this to KE9NS's version of PSDR?

Ken - NM9P
Photo of Ken - NM9P

Ken - NM9P, Elmer

  • 4173 Posts
  • 1331 Reply Likes

Posted 2 years ago

  • 1
Photo of Arnie

Arnie

  • 108 Posts
  • 20 Reply Likes
Ken:
I don't think PSDR by KE9NS is compatible with the RTL sdr dongles. 
73 de Arnie W8DU
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9178 Posts
  • 3526 Reply Likes
I am fairly certain this is the right answer
Photo of Dave - W6OVP

Dave - W6OVP

  • 302 Posts
  • 95 Reply Likes
Hi Ken- I've played with a number of SDRs including yours. Suggest you add a few bucks to it and get a REAL one like this SDRplay, with lots of varieties of free software and widespread support, and work MUCH better. They are available used. -Dave.  http://www.hamradio.com/detail.cfm?pid=H0-014408
Photo of Larry - W8LLL

Larry - W8LLL

  • 486 Posts
  • 107 Reply Likes
I have both a sdrplay and a less expensive dongle with the up converter built in. I have used sdr-uno, hpsdr, sdr sharp and have been using sdr console v3 which I like the best so far. You may be able to get PowerSDR IF to work with your dongle.
(Edited)
Photo of Ken - NM9P

Ken - NM9P, Elmer

  • 4173 Posts
  • 1331 Reply Likes
I have been playing with SDR Console V.3 this morning.  It is pretty slick.  But I haven't been able to figure out how to get it to do HF yet.  Having 10 receivers open on two meters or air band is pretty slick, though!

Thanks for the tip!
Photo of Larry - W8LLL

Larry - W8LLL

  • 486 Posts
  • 107 Reply Likes
I think your dongle has to have the up converter to work Hf.
Photo of Ken - NM9P

Ken - NM9P, Elmer

  • 4173 Posts
  • 1331 Reply Likes
The one I bought has a built-in bypass for direct sampling HF. It works on sdr# by tapping into only the Q channel. If I could do that with SDR Console, it would be wonderful.
Photo of Larry - W8LLL

Larry - W8LLL

  • 486 Posts
  • 107 Reply Likes
yeah I noticed my dongles that don't have the up converter will do HF with SDR# but none of the other sdr softwares. This is an inexpensive way to add a pan adapter to any radio that has cat control but unfortunately SDR# will not track with a radio like the others. This dongle http://www.ebay.com/itm/191564644649 works pretty well but its approaching half the cost of the sdrplay  that is far superior.
(Edited)
Photo of Ross - K9COX

Ross - K9COX

  • 345 Posts
  • 107 Reply Likes
Look at it this way, tilt hinge feet for a Maestro will set you back $90 or a power cable for a 6000 series is $25
(Edited)
Photo of Sergey, R5AU

Sergey, R5AU

  • 855 Posts
  • 116 Reply Likes
Hi Ken !
you can use ZEUS SW with RTL dongle, look into that site https://www.hfrelectronics.com/index.php?route=common/home

as far i know Yahoo group available as well