RF power meter issue.

  • 1
  • Problem
  • Updated 4 years ago
  • Solved
Got the new Flex 6300 up and running this morning and everything worked well. Came back a few hours later and now the RF power meter is not showing any power out. Have I set something incorrectly? Slider is set to 100 Watts. I do get a brief 'blip' when the ATU is activated.
Photo of Jim - AJ0IM

Jim - AJ0IM

  • 3 Posts
  • 0 Reply Likes

Posted 4 years ago

  • 1
Photo of Jon - KF2E

Jon - KF2E

  • 638 Posts
  • 189 Reply Likes
Make sure you are set on the correct mic input. See if CW gives you output and if it does make sure your mic is connected properly and set to the correct input. Bal is on the back Mic is on the front.

Jon
Photo of Jim - AJ0IM

Jim - AJ0IM

  • 3 Posts
  • 0 Reply Likes
Thanks Jon.  Got it.

This conversation is no longer open for comments or replies.