Remote power through SmartSDR

  • 1
  • Idea
  • Updated 5 years ago

I would like to see a 12V DC network based power on/off switch that SmartSDR can recognize.  The device shall have an ID field which SmartSDR will recognize and display as a remote (power) device and signal that device to turn on/off the power.

While working on a wish list, this device shall report environmental information such as DC voltage, DC current, AC voltage or solar charge current, ambient temperature, door open/closed sensor. 

The device may have other flex/user lines that may control other devices.

This device may also include a noise free 1GB network switch.

Although not Flex's main product line it could a) manufacture, b) rebrand OEM, c) have a list of supported OEM products.

The lack of power status is lacking in the 6000 series, especially key up and key down voltage.


Stan Williams
VA7NF

Photo of Stan - VA7NF

Stan - VA7NF

  • 451 Posts
  • 106 Reply Likes

Posted 5 years ago

  • 1
Photo of Jon - KF2E

Jon - KF2E

  • 677 Posts
  • 222 Reply Likes
This would be reasonably easy to put together using an Arduino with a network interface.

Jon...kf2e
Photo of KY6LA - Howard

KY6LA - Howard, Elmer

  • 3755 Posts
  • 1617 Reply Likes
DDUTIL already gives u a readout of the Voltage and Tempurate of the 6000 series INCLUDING Key Up and Key Down voltage.