Remote serial operation via VPN

  • 1
  • Question
  • Updated 1 year ago
  • (Edited)
Have remote station operating with Flex 6700 through Elecraft KPA 500 and KAT 500 tuner into ZS6BKW inverted V up 45 feet. Great reception and reports. This station is 2 hours outside Houston at lake house (no HOA). Using SoftEther VPN via DSL. My main operating PC is in Houston and prefer to run it all over the VPN.

Remote Desktop is too slow and unusable. Running SmartSDR over the VPN is workable at 3 FPS and slower refresh of spectrum chart.

Seems like most integration still takes place via arcane serial ports...CAT, KPA and KAT utility programs, etc. So two main questions are:

1) Which strategy and tools work well for remote access to the serial ports over VPN and Ethernet bridge?

2) Are there any integrated remote station tools that make this easier and better than integrating all the discrete functional components?

I have found commercial serial over Ethernet software ($300) and lots of incomplete remote station software tools but not yet seeing a complete picture that makes sense.

Any experienced pointers greatly appreciated.

Rick
Photo of Rick - W5FCX

Rick - W5FCX

  • 265 Posts
  • 69 Reply Likes

Posted 3 years ago

  • 1
Photo of Ria - N2RJ

Ria - N2RJ, Elmer

  • 2311 Posts
  • 950 Reply Likes
Hi Rick,

When I've had to do that, I used netcat on Linux/Unix, such as on a raspberry Pi or another PC running Linux with a serial port card or maybe even a Linux VM on the Windows machine. Not sure what there is in Windows. 
Photo of EA4GLI - 8P9EH - Salvador

EA4GLI - 8P9EH - Salvador

  • 1780 Posts
  • 547 Reply Likes
(Edited)
Photo of Jhon Perker

Jhon Perker

  • 2 Posts
  • 0 Reply Likes
operating outstation is not an easy thing, you told Flex 6700 through Elecraft KPA 500 and KAT 500 tuner into ZS6BKW to be in the process, but I think that this is not done with your process, I suggest you to go  Microsoft Edge Support for help, they told you the service which will you need.
Photo of Kari Gustafsson SM0HRP

Kari Gustafsson SM0HRP, Elmer

  • 279 Posts
  • 35 Reply Likes
Hi, it all depends on your available DSL bandwidth. I have been remote Dx-ing for 5 years starting with DSL and 500 kbit/s. Latency is most vital and should be < 80 ms. Perhaps this is of now concern for you. Most serial services are OK. Remote rig is very reliable propably the most used solution world wide. Why? Reliable and it integrates compressed audio with two serial channels and if you run CW feedbacks the audio to local PC.
Photo of Rick - W5FCX

Rick - W5FCX

  • 265 Posts
  • 69 Reply Likes
Paul,

Here are my VSPE config files for your examination and/or use:

http://wikisend.com/download/856358/VSPE.zip

In this folder you will find "Local" (where my SmartSDR runs on local PC) VSPE config file and screenshot of how it looks in VSPE UI, along with "Remote" (where my Flex radio and VSPE server runs) config and screenshots.

Let me know if you still have questions.
(Edited)
Photo of Mark WS7M

Mark WS7M

  • 505 Posts
  • 150 Reply Likes
Just to put this info in one place:

It appears the RS-232 solution above is a good one.

If you need USB then I suggest www.virtualhere.com.  This is server/client software that allows USB ports to be forwarded and used over the LAN or WAN (internet).

I use VirtualHere server on a cheap Raspberry Pi running Linux.  I plug my USB cable from my SPE amp into the Raspberry Pi.

I exposed a custom virtual here port through my router.

On remote computers I run the VirtualHere client, after selecting the server/device the USB device will appear as if connected directly to my remote PC.  This allows me to run the SPE USB Terminal software on remote computers both on the LAN and WAN.