remote_audio rx_on 1 - reply

  • 1
  • Question
  • Updated 2 years ago
I have a client connected to my Flex-6500 as a "gui" client.

When sending "remote_audio rx_on 1" the Radio responds by starting an Opus stream but the command reply is "50001000" which seems to indicate a problem. I would have expected a "0" reply indicating no problem.

I've used Wireshark to verify that the same response is being sent to SmartSdr when the Remote button is selected.

The "remote_audio rx_on 0" command also receives a "50001000" reply but seems to work correctly.
Photo of Doug - K3TZR

Doug - K3TZR

  • 93 Posts
  • 11 Reply Likes

Posted 2 years ago

  • 1
Photo of Eric - KE5DTO

Eric - KE5DTO, Official Rep

  • 698 Posts
  • 205 Reply Likes
Doug,

Thanks for bringing this to our attention.  I have added #4583 in our bug tracking system to address this.  As you noted, I don't think there is any harm in using the function as it looks like it is just the reply that is incorrect.
Photo of Doug - K3TZR

Doug - K3TZR

  • 93 Posts
  • 11 Reply Likes
Thanks Eric,

you are correct, it doesn't seem to stop anything from working. I just thought I was doing something wrong. When I noticed it happening with SmartSDR, I decided I should ask.