Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Recovery Screen on Maestro after Restart

Jerome Lofton
Jerome Lofton Member ✭✭
edited February 2020 in Maestro
I encountered a Recovery Screen on Maestro after Restart of my Model A Maestro. This unit was been on consistently 24/7 for weeks. and was working normally otherwise, except that it does have the screen orientation issue where it is sideways. I was attempting the previous post where you are to hold the power until the screen appears and the unit eventually shuts off, then power reset to complete. I  have done this on several occasions, but on this one time, I got things out of order and pulled the power connector first then held the power button until the screen appeared and eventually shut down. After that the Recovery Screen appeared and no matter what sequence of restart actions I have taken, it persists. 

Is there any thing that I can do locally, short of sending the unit in for service?
S/N 1616-5092-0100-2149
SW v2.5.1
Associated Radio: Flex 6700

73,
Jerome
WD4CWG

Comments

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited February 2020
    This ticket has been converted to a HelpDesk ticket and is being addressed by the FlexRadio Technical Support team.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.