RCA TX1 Enable not persistant

  • 1
  • Problem
  • Updated 3 months ago

RCA TX1 Enable is not persistant from boot up to boot up..  Anyone else have this problem?

Radio is 6300 with latest upgrade. 

Photo of Jim K4JAF

Jim K4JAF

  • 371 Posts
  • 114 Reply Likes

Posted 5 years ago

  • 1
Photo of Jon - KF2E

Jon - KF2E

  • 686 Posts
  • 230 Reply Likes
If you are looking at whether or not it is enabled before you connect to the radio it will show disabled. After you connect it will show correctly.

Jon...kf2e
Photo of Jim K4JAF

Jim K4JAF

  • 371 Posts
  • 114 Reply Likes
No, it consistently shows not enabled after the 6300 and software are initialized and working properly.  Jim K4JAF
Photo of Mal

Mal

  • 47 Posts
  • 0 Reply Likes
I am having the same problem with my 6700
Photo of Mal

Mal

  • 47 Posts
  • 0 Reply Likes

OK fooling around I found that TX2 and TX3presist TX1 doesn't

I set my amp on TX3 and no more problems

Photo of Larry - W8LLL

Larry - W8LLL

  • 532 Posts
  • 116 Reply Likes

RCA TX settings are saved in transmit profiles.


Photo of Mal

Mal

  • 47 Posts
  • 0 Reply Likes
True, but every time I turn on the rig, I have to go to the transmit profile and load it.
Photo of Mal

Mal

  • 47 Posts
  • 0 Reply Likes
Also my mike profile always comes up with a star next to it, indicating something has changed, but I don't know what.
Photo of David Decoons wo2x

David Decoons wo2x, Elmer

  • 1473 Posts
  • 314 Reply Likes
Aare you using DDUtil?
Photo of Mal

Mal

  • 47 Posts
  • 0 Reply Likes
Yes I am using it for my Steppir
Photo of Larry - W8LLL

Larry - W8LLL

  • 532 Posts
  • 116 Reply Likes
DDutil could also be causing the RCA TX issue. Check the box for manual TX control.
Photo of Mal

Mal

  • 47 Posts
  • 0 Reply Likes
I will try it
Photo of David Warnberg

David Warnberg

  • 698 Posts
  • 91 Reply Likes
I found that RCA TX1 is tied to a TX profile (notice on the right side a profile listed) once you set it... i.e. Profile Heil Pro Elite AMP, then save that profile... every time you select that profile it will be set

The second source is also DDUtil as mentioned

Good Luck

David
Photo of Joe WD5Y

Joe WD5Y

  • 176 Posts
  • 24 Reply Likes
I had this issue and it was the ddutil setting causing the problem. Hope you get it fixed.

Joe
WD5Y
Photo of Chris Tate  - N6WM

Chris Tate - N6WM, Elmer

  • 976 Posts
  • 272 Reply Likes
2 things.  Check DDUTIL as stated.  One thing I found in learning all this was to set your TX RCA ports as you want them, and save that off as a custom TX profile.  Now as long as you load that particular TX profile you should be in good shape.  This worked out great for me and solved by TX relay persistence challenges. 
Photo of Steve K9ZW

Steve K9ZW, Elmer

  • 1584 Posts
  • 775 Reply Likes
Sure would be nice to have some sort of setting's overview "dashboard" to graphically present the current state of all settings.

I've had the TX1 not enabled as expected issue when SmartSDR does a dump and is restarted. Will use the notes here to troubleshoot. Still working on why every now and then SmartSDR unexpectedly terminates, but won't spend very much time on troubleshooting 1.6.21 with 1.7.x just around the corner.

73

Steve K9ZW
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9199 Posts
  • 3559 Reply Likes
Every time this issue comes up in Support, it is DDUtil resetting the TX Relay port.
Photo of Joe Conover

Joe Conover

  • 315 Posts
  • 53 Reply Likes
Cannot enabled any RCA TX here picture
Photo of mikeatthebeach .

mikeatthebeach .

  • 480 Posts
  • 82 Reply Likes
You are in wrong menu
Go to Tx band settings
Mike
(Edited)