Radios wont tune when using RTTY

  • 1
  • Question
  • Updated 2 years ago
I have 2 FRS radios a 6500 and a 6700. I was just checking them both a couple of hours before the SARTG RTTY contest today.
A major problem, the radios will not transmit on RTTY.
Pushing the tune button on SSDR (no RTTY program running) to ensure they were working, I get no output, checking showing on the monitor, other modes the tune button works perfectly.such as Digi L, LSB etc (Dax is enabled for Digi L and RTTY).
Ideas please as I would have like to operate in the contest.
Thanks
Ross
ZL1WN/ZL1N 
Photo of Ross Biggar

Ross Biggar

  • 121 Posts
  • 2 Reply Likes

Posted 2 years ago

  • 1
Photo of Ernest - W4EG

Ernest - W4EG

  • 588 Posts
  • 115 Reply Likes
Do you have the Rcv DAX set to the same number: On Tx side is DAX on(blue)?
Also I operate RTTY using SSB and HRD ...No problem...
Photo of k3Tim

k3Tim

  • 825 Posts
  • 159 Reply Likes
Please check the transmit Lo cut and Hi Cut filters settings in PHNE panel are set to allow the tones to get through.
Does the RTTY AFSK tones show up on the DAX panel TX stream?

GL in the test.

Tim