Radio in use...

  • 1
  • Problem
  • Updated 2 years ago
Flex 6400M... been on for weeks. Was about to go to bed and looked at radio and it had a message...
The Radio selected is in use please try connecting again.
Was about to hit the OK box and the screen went to the Info, connect and Smartlink setup screen. The radio is running 2.3 software. Found this thread from 3 months ago.

So with Eric's response I am wondering is this issue has been fixed?? I have seen this on several occasions before but not in a long time. Had it happen when I first got the radio but I think it has been 6 weeks or so ago since it last happened.
Photo of Rick  WN2C

Rick WN2C

  • 327 Posts
  • 51 Reply Likes

Posted 2 years ago

  • 1
Photo of Wayne


  • 614 Posts
  • 89 Reply Likes
Have not had it happen to me since I updated to v2.2.8, have not updated to v2.3 since I have no desire for the rig to automatically decide how much power to run and when to change it. v2.2.8 is golden for me probably wont update again absolutely no issues experienced with it except the profile keyboard which has been there since I got the rig.
Photo of KB4OIF


  • 245 Posts
  • 27 Reply Likes
Mine does it too rick.  Running the latest software.  No other problems so far.  
Photo of David Salomon

David Salomon

  • 111 Posts
  • 26 Reply Likes
Still happens to me every day. On latest software.
Photo of Thomas NE7X

Thomas NE7X

  • 64 Posts
  • 11 Reply Likes

Yes, I am intermittently seeing this same issue, even after the new V2.3.7 upgrade. Reboot is required to clear error.

Photo of Jeff | VA2SS

Jeff | VA2SS

  • 40 Posts
  • 2 Reply Likes
Happen to me this morning.... using latest version...
Photo of KB4OIF


  • 245 Posts
  • 27 Reply Likes
anyone heard if they are going to fix it.  Or the fix they said was already in the software failed.  Almost every time I turn mine on it does it.