question about pin out

  • 1
  • Question
  • Updated 5 years ago
  • Answered
Got some peripherals to attach to the FLEX 6500 I'm curious I'm not sure about the ground connections on pin 6, 7, and 8.
if those pins are tied to the same ground as Pin #5, or if they are

The peripherals are the Signalink and KamPlus

Photo of James Kennedy-WU5E

James Kennedy-WU5E

  • 310 Posts
  • 32 Reply Likes

Posted 5 years ago

  • 1
Photo of Al K0VM

Al K0VM, Elmer

  • 583 Posts
  • 95 Reply Likes
From a DC point of view they appear to be tied together. and you're probably be okay assumed they are. How closely they are tied together from an audio/rf point of view, I can not say.

Photo of Don - kx9q

Don - kx9q

  • 442 Posts
  • 19 Reply Likes
I am using the Navigator and the cable I am using between the Navigator and the Flex 6700 has pins 6,7, and 8 tied together to Audio ground in the Navigator and pin 5 is separate and goes to its own ground pin on the Navigator. Unfortunately I can't tell if they are tied together internally on the Navigator.

This conversation is no longer open for comments or replies.