PTT does not key my PW1 amplifier

  • 1
  • Question
  • Updated 3 years ago
This is a new 6300 which is up and running with DDutil 3 and DAX to control the PW1 frequency and connect to PC software. But, it does not key over the PTT cable and TX 1. I checked the voltage on the PTT line and it reads about  3.5V DC constant, even as I push the MOX button on SmartSDR. I can key PTT on the PW1 by grounding the cable. I tried all of the recommended software settings in these posts. Is it a hardware issue or other? Thanks. 73, Bruce K6ZB
Photo of Bruce Elbert

Bruce Elbert

  • 5 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of KY6LA - Howard

KY6LA - Howard, Elmer

  • 3737 Posts
  • 1600 Reply Likes
You need to enable the PTT Line in the startup screen

AND you need to have DDUTIL set to OPERATE which activates that line
Photo of EA4GLI - 8P9EH - Salvador

EA4GLI - 8P9EH - Salvador

  • 1780 Posts
  • 547 Reply Likes
Photo of Larry - W8LLL

Larry - W8LLL

  • 498 Posts
  • 110 Reply Likes
Write a reply