Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Problems with WSJT-X

K0SWT
K0SWT Member
edited March 2020 in FLEX-6000 Signature Series
I'm unable to get my flex 6300 to work correctly with WSJT-X. I am using slicemaster and everything is configured correctly. For the past week I have been trouble shooting why it won't work. I am able to use it to send wspr it works fine. It shows recieve and says decode but, nothing shows up in the panel on the left side. I am running meinberg for time sync. Any ideas? Thanks in advance and 73's. K0SWT

Answers

  • Neil D Friedman N3DF
    Neil D Friedman N3DF Member ✭✭✭✭
    edited October 2019
    What version of WSJT-X?
  • AH0U
    AH0U Member
    edited June 2019
    Can you see the green bar graph on the left side of WSJT and if so does it bounce up and down???
  • K0SWT
    K0SWT Member
    edited March 2019
    Yes it does.
  • K5CG
    K5CG Member ✭✭
    edited March 2019
    Do you have CAT control setup with WSJT-X such that when you select a band from the drop down control in WSJT-X, it changes the frequency of the Flex?

    More often than not with digital modes, the radio is simply not tuned to the correct spot.
  • Craig_KØCF
    Craig_KØCF Member ✭✭✭
    edited March 2019
    I repeat N3DF's question: What version of WSJT-X are you running? If it is not 2.0, you will likely see nothing decoded because the specification changed with v 2.0 and it is NOT compatible with older versions.
  • K0SWT
    K0SWT Member
    edited March 2019
    That was the problem. I uninstalled and loaded the updated version. Thanks all.
  • K0SWT
    K0SWT Member
    edited March 2019
    I updated to 2.0 and it is working fine now. Thanks all.
  • Maurice PC9T
    Maurice PC9T Member
    edited March 2020
    I have the same problem, already upgraded to the latest version of WSJT-X and version V3.1.8.
     I see activity in the waterfall and the reciving db meter is bouncing and decode is sometimes flashing but no reception under band activity.
  • AH0U
    AH0U Member
    edited December 2019
    Have you checked your clock??
  • Maurice PC9T
    Maurice PC9T Member
    edited March 2020
    I have timeserver:time.windows.com running last check was 1 week ago, but after synchronisation it's working again; tnx for the tip .

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.