Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

PowerGenius pass-thru question

Butch
Butch Member ✭✭✭
edited February 2020 in FLEX-6000 Signature Series
Reference the two Input and two SO-239's on the PowerGenius XL.  When one set of in/out SO-239's are active, are the unused set of SO-239's being passed through?  Or are the unused SO-239 in/out connections just open?    

Answers

  • Ria
    Ria Member ✭✭✭
    edited November 2019
    Passed through. It basically wants to behave like two amplifiers that can only produce one signal at a time. But you can TX on one while RX on the other for true SO2R. 
  • Rick N4RZ
    Rick N4RZ Member ✭✭✭
    edited February 2020
    Can we also assume it can do true pass through which would be transmitting though both sides at the same time with the first transmitter keyed getting the amp and the second transmitter keyed coming out barefoot? 
  • Ria
    Ria Member ✭✭✭
    edited November 2017
    Probably. I don’t know if it is designed for that though. There is nothing stopping you from doing that but I’m not sure if equipment damage will occur.
  • Butch
    Butch Member ✭✭✭
    edited November 2018
    Perhaps my post needs some clarification.  I assume the amplifier will only amplify one input/output connection at a time... for example Input 1 to output 1 (or output 2).  But assuming the transceiver 1 is being amplified and passed on to output 1, would a transceiver that's connected to input 2 be passed-thru to output 2 (un-amplified)?

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.