Power Genius with 2.3.7

  • 1
  • Question
  • Updated 3 months ago
Updated to 2.3.7 and have lost my
Standby/Operated button below the amp meters.  I see that the amp swr meter also changed so the 1.2 is at the far left side but still red at 1.2 swr all the time.  Is this normal for now??
Photo of Jim Runge

Jim Runge

  • 78 Posts
  • 15 Reply Likes

Posted 3 months ago

  • 1
Photo of David Decoons wo2x

David Decoons wo2x, Elmer

  • 1138 Posts
  • 235 Reply Likes
It is normal for the red line to be at 1.2 SWR as it does not detect anything lower. The bar graph resting position is at the minimum it detects.

Try shutting down both the radio and amp (rear power switch on amp) and turn back on. If you still do not have AMP displayed on bottom right of SmartSDR you can try resetting amp and reconfiguring the connection to the Flex.

Dave wo2x
 
Photo of Jim Runge

Jim Runge

  • 78 Posts
  • 15 Reply Likes
Thanks Dave. 
 Yes, the AMP is on the bottom and now I see we can click on that.  There was a button just below the amp temp meter that is now gone.  Clicking on the AMP at the bottom works for me.
73  Jim K6JR
Photo of David Decoons wo2x

David Decoons wo2x, Elmer

  • 1138 Posts
  • 235 Reply Likes
Yes, makes it easier to turn amp on and off in case the amp panel is hidden. I like it better.
Maestro also has an amp indicator on main screen that can be touched to toggle amp.

73
Dave wo2x