Poor Opposite Sideband Suppression

  • 1
  • Problem
  • Updated 5 years ago
  • In Progress
I recently had a QSO on 40 Meters with another Flexer with a 6500. My lower sideband was S9+20 dB but my upper sideband was S9. I am running Version 0.13.10 with a 6700 without the GPSO unit. The PC runs with the XP Operating System. It was suggested that I power down and power up the 6700. That "fix" only works part of the time. If the display shows the opposite sideband while transmitting then the problem is there.

This issue was closed 17 days ago but not for me!
Photo of Rich K3SOM

Rich K3SOM

  • 17 Posts
  • 3 Reply Likes

Posted 5 years ago

  • 1
Photo of K1UO - Larry

K1UO - Larry

  • 773 Posts
  • 126 Reply Likes
Hi Rich,
See Gerald K5sdr's reply in the below link. Basically the problem has been fixed but didn't make it into the current prerelease version 0.13.10.

http://community.flexradio.com/flexra...

regards, Larry K1UO
Photo of Rich K3SOM

Rich K3SOM

  • 17 Posts
  • 3 Reply Likes
Hello Larry,
Thanks for your reply. Last night I powered down/up the 6700 three times with a cold "everything" restart in the middle and still had the problem. It finally went away on the fourth time. This is frustrating for me and a bit embarrassing as many of us take pride in the quality of our transmitted signal.