Picture of the rear of the 6600M

  • 1
  • Question
  • Updated 2 years ago
  • Answered
Can someone post a picture of what the rear of the 6600M PRODUCTION unit looks like please. The picture on Flex web site is a old prototype picture, looking at what the finished production models look like, thanks
Photo of Robert Lonn

Robert Lonn

  • 401 Posts
  • 143 Reply Likes

Posted 2 years ago

  • 1
Photo of Jean Drolet

Jean Drolet

  • 112 Posts
  • 17 Reply Likes
inside picture or outside ?
Photo of Robert Lonn

Robert Lonn

  • 401 Posts
  • 143 Reply Likes
Outside, Back Picture..
Photo of Ted  VE3TRQ

Ted VE3TRQ

  • 580 Posts
  • 206 Reply Likes
Here's the back of my 6600M, complete with all the temporary hookups :-)
Photo of Robert Lonn

Robert Lonn

  • 401 Posts
  • 143 Reply Likes
Thanks Ted, looks GREAT!!!!!! Can the 10 MHz output be switched to accept a 10MHz INPUT from an external GPS reference??? 
Photo of Craig - KØCF

Craig - KØCF

  • 209 Posts
  • 74 Reply Likes
No, but if you look you will see that there is a separate 10MHz input.

73,
Craig, KØCF
Photo of Ted  VE3TRQ

Ted VE3TRQ

  • 580 Posts
  • 206 Reply Likes
It's the phono jack next to Tx3. Too bad it's not a BNC :-(
Photo of Robert Lonn

Robert Lonn

  • 401 Posts
  • 143 Reply Likes
OK, I see it now..  BNC or TNC, I have a BNC to RCA Phono, so it should work fine.
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9198 Posts
  • 3558 Reply Likes
Official Response
The website has been updated with rear panel pictures of the production 6400M and 6600M

This conversation is no longer open for comments or replies.