Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

no transmit on 6500

Kennth Blanton
edited February 2019 in SmartSDR for Windows
On the Flex 6500 loaded up smartSDR for first time today .. receiver works apparently, but no output on transmit into dummy load. tuner works and indicates success, but speaking into mic indicates 20 watts and no more , even on AM

Answers

  • George KF2T
    George KF2T Member ✭✭✭
    edited February 2019
    In Tune mode, can you move the power to the right and see full power? How about CW? What microphone are you using? In many cases, the +20db button needs to be pressed for full output - is the modulation meter fully deflecting? By the way, I believe AM operation is not recommended at this time. Good luck & welcome to the 6500 club!
  • Dave - WB5NHL
    Dave - WB5NHL Member ✭✭
    edited December 2014
    AM transmit isn't implemented in 0.13.10 software. George is right, check the +20db button and slide the mic gain up.
  • Michael - N5TGL
    Michael - N5TGL Member ✭✭
    edited December 2016
    From page 6 of the 0.13.10 release notes: "6. Only transmitting on USB/LSB and CW is supported. Do not transmit on AM" Read the release notes. The radio you save may be your own. :)

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.