No mike auto with DAX on with 3.4.9

  • 1
  • Question
  • Updated 3 weeks ago
Can some one tell me why I now have no mike auto out with dax on using 3.4.9 ?
Photo of FRED  W9TB

FRED W9TB

  • 138 Posts
  • 53 Reply Likes

Posted 4 weeks ago

  • 1
Photo of FRED  W9TB

FRED W9TB

  • 138 Posts
  • 53 Reply Likes
Sorry for the spelling. I can't get any ssb output with dax on with 2.4.9 anyone else have this problem ?

Photo of WX7Y

WX7Y

  • 546 Posts
  • 98 Reply Likes
What is your MIC input settings? 
If your using the "PC"  Mic setting and DAX get's turned on it kills the PC MIC  this is NOT new and has never worked that I remember, Wish it did. 
I can confirm that "BAL"anced works fine with DAX ON or OFF.

73's
Bret
Photo of Ken - NM9P

Ken - NM9P, Elmer

  • 4007 Posts
  • 1233 Reply Likes
Question for clarification:

Are you running with your Mic directly connected to the rig, or via PC Audio and your computer?

Also which rig are you using?  and are you using SSDR/Win or Maestro or "M" control surface?

Ken - NM9P

Photo of FRED  W9TB

FRED W9TB

  • 138 Posts
  • 53 Reply Likes
 Mic directly connected to the rig. 6600M Using SSDR
Photo of Ken - NM9P

Ken - NM9P, Elmer

  • 4007 Posts
  • 1232 Reply Likes
I just tested with mine.  If I turn DAX on and use my footswitch, then I have TX Audio from the mic, same as before in previous versions.   If I use the MOX button, I do not get TX audio from the Mic, because the rig doesn't know which audio input I want - Mic or DAX.  (MOX works OK with the DAX button OFF)

I dug up my hand mic and tried it as well.  No problem with PTT with DAX button turned on.

How are you keying your rig?  with the hand mic, the Footswitch jack, or the MOX button?

You may also try toggling the DAX button on and off and back on to see if it somehow got scrambled...

Ken - NM9P
Photo of FRED  W9TB

FRED W9TB

  • 138 Posts
  • 53 Reply Likes
Ken, PTT works fine but vox don't work. I like to use Romac auto id will not work if dax is off.
Photo of Tom Teague

Tom Teague

  • 20 Posts
  • 6 Reply Likes
I concur with Fred and Ken.  After the v2.4.9 update, if you have both DAX and VOX on at the same time you can't get any audio from your microphone without using a manual PTT.  So when using VOX to key your microphone and programs like RoMac CW Identifier they will not work the same way it did before the update.  YOU NOW HAVE TO ALWAYS USE MANUAL PTT WITH RoMac.
(Edited)
Photo of Burt Fisher

Burt Fisher

  • 1072 Posts
  • 372 Reply Likes
I can't monitor a recorded CQ while transmitting, solution?
Photo of Bill -VA3WTB

Bill -VA3WTB

  • 2909 Posts
  • 631 Reply Likes
You need to press dax to hear your recording.
Photo of Bill -VA3WTB

Bill -VA3WTB

  • 2909 Posts
  • 631 Reply Likes
There is something brocken, My radio still freezes when playing audio back with Dax pressed.