No CW Transmit - PowerSDR - Flex3000 - HRD 6.4 - DM780

  • 1
  • Question
  • Updated 6 months ago
  • (Edited)
Using Flex3000 with PowerSDR 2.8.0.68 by KE9NS with WIndows 10 Pro.  Have Ham Radio Deluxe 6.4, DDUtil, WSJT-X and JTAlert all playing nicely together. 

Now trying to set up DM780 to work within HRD and I have ran into a brick wall trying to get it to send CW from keyboard or using macros.  In DM780 Tools>Program Options>PTT tab I have "via Ham Radio Deluxe..." selected.  With PowerSDR in CWU on 20m I see DM780 sending the code in the receive screen but no output from radio.  I can send with my Bencher key and transmit output is fine.  

I tried selecting USB mode and sending code via keyboard and macro and see code being sent in receive screen and the a couple seconds later the radio gets locked into transmit (MOX) without any power out indicated.  I have to select the MOX button on PowerSDR to unkey the radio. Of course Bencher key does not do anything because the radio is in USB mode.

I have also tried setting a VSP port in DDUtil for PTT, made the Program Options change, went through the same checks as above and that did not work.

Any and all constructive suggestions, welcomed.
Photo of Jim - KC4FWS

Jim - KC4FWS

  • 1 Post
  • 0 Reply Likes

Posted 6 months ago

  • 1

Be the first to post a reply!