New Flex-2400M owner observations.

  • 1
  • Idea
  • Updated 6 months ago
I have had my 6400M for two weeks and I love the receiver.  Best noise mitigation I have encountered in a radio.  That said, I believe that Flex has missed the mark on a stand alone system.  
I agree with the QST review that the lack of front panel jacks(8 pin microphone, headphone, CW key) is a nuisance.  Others who have reviewed the M series have pointed this out.  There is plenty of room where the speaker grill is located and that can be moved over or bottom mounted.
CW operation may have been an after thought. Flex and Icom are the only major radio manufacturers who do not have a CW decoder installed.  I have an Elecraft KX3 and the decoder really helps when working a faster station in contests. I was surprised to hear a relay when operating CW.  I would have expected a solid state relay in a Flex. 
The need to use amplified speakers shows the computer mentality in the designers. I saw a recent add from Flex on the 3.0 release and it was stated "the radio is the software".  Yes, I agree,  but there is also the physical interface with the operator.  
One more question, where is the UTC clock?  There is plenty of space under the Menu box.
I consider my 6400M to be a transition design that needs considerable tweaking to bring it to the level of the competition in the operator interface for a stand alone design.
I am happy with my decision to purchase the Flex even with it's misses.
Leo NK8L
Photo of Leo Nessing

Leo Nessing

  • 36 Posts
  • 8 Reply Likes

Posted 6 months ago

  • 1
Photo of Bill -VA3WTB

Bill -VA3WTB

  • 3887 Posts
  • 947 Reply Likes
I consider my 6400M to be a transition design that needs considerable tweaking to bring it to the level of the competition in the operator interface for a stand alone design.
I am happy with my decision to purchase the Flex even with it's misses.

You think the 6400 is not at the level found in other radios for the operators.

Can you list the things you like, that makes you glad you purchased the 6400
Photo of Leo Nessing

Leo Nessing

  • 36 Posts
  • 8 Reply Likes
As I stated the noise mitigation is the main reason I purchased the Flex.  I had an Icom 7610 for about a month and the Flex walks away from the Icom  in that respect. 
The display is great and the touch screen is easy to use as are the drop down menus.  The 6400M is advertised as a stand alone system but requires a computer interface to have a simple function as a clock.  
Leo NK8L
(Edited)
Photo of WW1SS - Steve

WW1SS - Steve

  • 793 Posts
  • 268 Reply Likes
Well I guess it is a double edge sword. I have both sitting here in the shack and the Icom will kill my noise that the Flex won't touch. So go  figure.
Photo of Burt Fisher

Burt Fisher

  • 1241 Posts
  • 480 Reply Likes
I have not found my 6400M to do anything worthwhile to kill noise. The M does have an internal speaker much to my surprise. I would buy an upgrade if it had a CW decoder.  Then there is the S-meter which reads S-7 on a dummy load.
(Edited)
Photo of Bill -VA3WTB

Bill -VA3WTB

  • 3887 Posts
  • 947 Reply Likes
It should read S3 on a dummy load.
Photo of Burt Fisher

Burt Fisher

  • 1241 Posts
  • 480 Reply Likes
Every other rig reads zero.
Photo of Gene Duprey

Gene Duprey

  • 121 Posts
  • 16 Reply Likes
Mine reads S 2.5 on a dummy load.  My S-Line and Icom 775 read S 0.  Go figure.  My noise floor on 20 & 40 is -120 dbm, which is very good, so why the S meter disparity?
Photo of KF4HR

KF4HR

  • 795 Posts
  • 269 Reply Likes
Interesting.  Not long ago I've heard someone complaining about the 8-pin mic jacks on the Flex 6300, 6500, and 6700 because they found them too difficult to wire up.  Perhaps someone will eventually come out with a mic multiple adapter box with all the various types of mic jacks: RJ-45, XLR, 3.5mm mono, 3.5mm stereo, 1/4", 8 pin, 4-pin, 2-pin, PJ-068, etc, so everyone can be happy.

There is a clock and date in the lower left corner of the screen when using SSDR with a PC or laptop, although it not on the Maestro and M screens. 

Perhaps Flex's design logic behind the Maestro and M screens are, odds are most people will be using a computer [of some sort] with their M rig or Maestro to handle after-market digital communications, logging, etc, so their computer provides an abundance of CW and other digital communication decoding via after-market programs, along with nearly every clock imaginable.  
Photo of Leo Nessing

Leo Nessing

  • 36 Posts
  • 8 Reply Likes
The 6400M is advertised as a stand alone system - no computer required except for updates.  I use a computer for logging but not interfaced with the radio.  Third party software should not be required for a stand alone system.
As far as the front panel microphone connector , it can be of any design, just front panel mounted.
Leo NK8L
(Edited)
Photo of Bill -VA3WTB

Bill -VA3WTB

  • 3886 Posts
  • 947 Reply Likes
Leo, can you name any stand alone radio that needs no 3rd party software to do everything we do?
Photo of Leo Nessing

Leo Nessing

  • 36 Posts
  • 8 Reply Likes
Elecraft  will do all basic operation plus many complex operations without 3rd party software.  As I stated at the beginning , I am new with the 6400M and I can only compare it to radios that I have used.  I wouldn't have expected to have to use third party software for CW decoding in this class of radio or use a program to bring a clock into use. Most of the reply's I am getting are very defensive and are missing my whole point, which I shouldn't have to keep repeating. 
The 6400M is a good radio and I am enjoying using it.
Leo NK8L
(Edited)
Photo of Gene Duprey

Gene Duprey

  • 121 Posts
  • 16 Reply Likes
I do not use a computer with my 6500/maestro combo.  My computer is a Mac which is not compatible with most 3rd party software.  I would love to have a clock and cw reader.  The clock was the first thing I missed, I mentioned this to Matt at Flex, as when I am operating remote, I have no clock to use for UTC time for logging, which I do with a paper logbook.
Photo of Gene Duprey

Gene Duprey

  • 121 Posts
  • 16 Reply Likes
It would also be nice to have a video out connection with the Maestro.
Photo of Chris Tate  - N6WM

Chris Tate - N6WM, Elmer

  • 942 Posts
  • 268 Reply Likes
It takes very little expended ham spirit resources and $ to make up(or buy)  some pig tales so you don't have to reach in back to plug anything in if your environment requires it. that includes 1/8 inch headset, mic and cw paddles.
Photo of Leo Nessing

Leo Nessing

  • 36 Posts
  • 8 Reply Likes
Making work where it should not be required.
Leo NK8R
Photo of Chris Tate  - N6WM

Chris Tate - N6WM, Elmer

  • 942 Posts
  • 268 Reply Likes
not really.. the existing solution works fine. it just makes it convenient for those with issue with it in their particular environment.
Photo of Geoff - AB6BT

Geoff - AB6BT

  • 136 Posts
  • 32 Reply Likes
Some folks might find the front panel mic connector objectionable. A rear panel connector allows for an out-of-the-way routing option for a cleaner looking installation.

Besides, how often do you need to unplug it?
Photo of Leo Nessing

Leo Nessing

  • 36 Posts
  • 8 Reply Likes
I guess most people are not reading what I am stating.  I am comparing the 6400M to other stand alone designs ie:Elecraft, Kenwood, Icom, Yaesu etc.. The Flex-6400M is sold as a stand alone design and the ergonomics of the radio can be compared to the competition.  Sticking a Maestro on the front of a box dose not automatically make it a good stand alone design.
Leo NK8L
Photo of Bill -VA3WTB

Bill -VA3WTB

  • 3886 Posts
  • 947 Reply Likes
This is most interesting, What Makes and models do you consider great ergonomics?
Photo of Leo Nessing

Leo Nessing

  • 36 Posts
  • 8 Reply Likes
I never said "great ergonomics".  Having your accessories mounted on the front of the radio as stated earlier, this part of the ergonomics of a radio...where thing are physically positioned.  The tuning control on the Flex has a nice light touch but a tension adjustment would probably be appreciated by some operators such as the reviewer in the QST article. This is ergonomics.  Look at your high end competitors and see how they position and adjust controls and accessories.

I really wanted to see what kind of response I would receive with this post and it was predictable in the many replies.   People reacted as if I said they had an ugly child instead of seeing what I was posting.  


I have my 6400M connected to my router with a HDMI cable and have controlled it with my laptop as an experiment. It was fun but not my type of operation nor are most digital mode such as FT8.  I am a sit in front of my station operator running SSB and CW.
Leo NK8L
Photo of Geoff - AB6BT

Geoff - AB6BT

  • 136 Posts
  • 32 Reply Likes
This is also confusing.

How do connect to a router with an HDMI cable?
Photo of Leo Nessing

Leo Nessing

  • 36 Posts
  • 8 Reply Likes
I have the cable connected to back of the 6400M and the back of the U-Verse internet router which is located in my shack.  I had to buy a 15' cat6 cable to reach the router. The 6400M is connected to the home network if I want it to be.
Leo NK8L
Photo of Ted  VE3TRQ

Ted VE3TRQ

  • 573 Posts
  • 203 Reply Likes
I simply assume Leo meant that he had his 6400M connected with an HDMI cable AND to his router. Makes sense - many would run it that way.
Photo of Leo Nessing

Leo Nessing

  • 36 Posts
  • 8 Reply Likes
My mistake on the cable. It's an Ethernet Cat 6 cable.
Leo NK8L
Photo of Ted  VE3TRQ

Ted VE3TRQ

  • 573 Posts
  • 203 Reply Likes
Contrary to some opinions, I consider having the connectors on the back an advantage - it makes it much easier to construct a separate connector box for the front of the radio. Let’s face it, if you want connectors on the front, it is because you connect and disconnect often (why else care about connector location?) Most (many) radio connectors these days are either not of the greatest quality, or are board edge connectors exposed through the radio case. These are not designed to withstand frequent connect/disconnect operations, nor even the stress of flexing cables. Replacing these connectors on the radio is not convenient, and probably not cheap. Plugging in your own connector box once saves stressing the radio’s connectors, and allows you to use connectors of whatever quality you wish.

And if you just plug the external equipment in once and leave it, rear connections make everything much neater.
Photo of Gene Duprey

Gene Duprey

  • 121 Posts
  • 16 Reply Likes
I have noticed the lack of quality in connectors these days.  The plug from my West Mountain speakers to the 6500 fits loose and causes problems loosing ground quite often and I have to fiddle with it to make a good connection.  Even Pl-259 connectors are poor these days.  I just put up a 80 meter antenna the other day and the Pl-259 would not properly mate with the SO-239 connector without forcing it to go in.
Photo of Bob

Bob

  • 32 Posts
  • 6 Reply Likes
Gene I also have had trouble with poor fitting PL 259’s. I started buying Amphenols and tho they are more expensive they have worked for me. Also like their barrel connectors vs the inexpensive ones that often gave me grief as well.
Photo of Roger,  W6VZV

Roger, W6VZV

  • 263 Posts
  • 120 Reply Likes
I like just about every thing about my Flex 6400M.  I am fine with the MIC connector and key jack being on the back.
The things I love about the Flex:
1.  The on-computer SDR software is very very good.  First time I've found computer control that I like better than the rig panel.
2.  The Receiver is great.  I especially love the narrow filters for digital and CW operations.
3.  The SDR software is very portable between computers.  No hassle installation.
4.  I uniformly get outstanding transmission reports on CW, SSB, and digital.  A very high quality rig.
5.  Love the menus both on the "M" front panel and the SDR software.  Very intuitive and easy to learn and use.
6.  QSK with CW is the best I've ever used. 
7.  It is SO nice using DAX and CAT instead of some hard-to-wire-and-install interface box.

de Roger W6VZV
Photo of Leo Nessing

Leo Nessing

  • 36 Posts
  • 8 Reply Likes
You must not have operated a Elecraft on CW. 
You have just supported my argument by stating you are using an external computer. 
The 6400M is sold as a stand alone design.  You and others are missing the point of my discussion.  I do like operating the Flex.
Leo NK8L
(Edited)
Photo of Roger,  W6VZV

Roger, W6VZV

  • 263 Posts
  • 120 Reply Likes
True, I have not used an Elecraft.  Nor would I want to given that I have a Flex.  :-)
Seriously, I don't agree that the Flex 6400M is supposed to be a "stand alone design."  It can certainly function as one and it does so with panache and elan.  However, it is very slick to run it with SDR on my computer along with other software such as DM780 and WSJT-X.  It does very well either way.
(Edited)
Photo of John N6NTM

John N6NTM

  • 14 Posts
  • 15 Reply Likes
I’m with Roger.....GO FLEX....here you have the Most versatile Radio on the market.....leading the charge in the future of radio......and the majority Of comments are minuscule complaints...why ..?....do you think negative opinions encourage designers to improve ....its my first day here ....I’m somewhat disappointed.....with all the great attributes From Flex and still so many quick to point out dislikes......might I suggest a different approach to suggestions ...something on an upfull note.....help Flex people WANT.....to keep coming up with even more evolutionary ideas....GO FLEX.....I love your ideas...
Photo of George Molnar, KF2T

George Molnar, KF2T, Elmer

  • 1668 Posts
  • 613 Reply Likes
Thanks, Leo, for your observations. Truly we all have different opinions and expectations, and it is helpful to hear yours. I am sure the Flex team will take note and use them (and others) for future development. Not that everyone’s wish list will get met, but the feedback is listened to.

As for a CW decoder, I cannot disagree more (sorry). There is no need for such a gimmick in any radio, especially one designed to function as a radio server, meant to work with client applications. For CW, the beat client will always be a good set of ears, anyway. Heck, I knew a fine operator who was deaf/blind, and used CW exclusively with a transducer at 20+ wpm. M y point is, I believe that such helper applications are best left outside of the main radio client. Client bloat should be avoided anytime possible.

Have used both Elecraft and Flex in CW contests. Both are fine radios, but I do prefer the interface and ergonomics of the Flex platform. Those two brands probably represent the best in class for the amateur market. To each his own preferences, though.
Photo of Burt Fisher

Burt Fisher

  • 1241 Posts
  • 480 Reply Likes
A CW decoder is not a gimmick it allow me to copy higher tham my code speed on a good fist with a 579+. Ear is better if one is capable of higher speeds.  
Photo of John - AF3K

John - AF3K

  • 147 Posts
  • 56 Reply Likes
George - Thank you for your great response.  I couldn't have said it better.  
Photo of Leo Nessing

Leo Nessing

  • 36 Posts
  • 8 Reply Likes
Sorry to disagree, but a CW  decoder is an invaluable tool during contest.  If it wasn't I doubt that Elecraft would include it with their radios and also the new high end radios from Kenwood and Yaesu. PJ2T contest station has put in Elecraft's and they all decode CW. How many contest stations run Flex?
Leo NK8L
Photo of Chris Tate  - N6WM

Chris Tate - N6WM, Elmer

  • 934 Posts
  • 267 Reply Likes
Leo,  George speaks with wisdom here, with some opinion on the decoder and you have shared yours.  I use flex, and prior to flex I used Elecraft.(8 years) as technical lead at N6RO, one of the largest multi-multi contest stations on the west coast,  we have migrated our primary operating positions to flex after many years on the Elecraft platform.  Both are best in class.   I am sure you have read about K9CT as well, who migrated his contest station as well.  Both platforms are competition grade.  the Flex SDR technology offers advantages to the competitive operator that cannot be overlooked and have been adopted by many.

There is not a decoder on the planet that can decode with the efficiency of an experienced CW contester.  I am sure decoders like the one included in the K3 are useful to some, but its not in any way necessary with either platform and a trained cw ear, particularly in a contest environment. 

But if you wanted too,with flex, you can have cw skimmers, plugged into 4 dax iq channels decoding every dit and dah of cw on 4 bands without any audio cables needed. this can be setup in minutes.   There are just things the flex can do.. that the others can not.

I can safely say I am an expert on both platforms.  I can safely say I have won contests on both platforms.    Right now I am using my brain to copy cw, and the capabilities of flex to keep me on top of the pack in serious competition.

Some of the TOP cw operators (in the world) are using Flex transceivers to win contests. They were recently used in WRTC. Lots of contesters are using flex.  lots of contest stations are using flex.
Photo of Neil D Friedman N3DF

Neil D Friedman N3DF

  • 239 Posts
  • 76 Reply Likes
Elecraft's built-in PSK31 is yet another complete waste of space.
Photo of Bill -VA3WTB

Bill -VA3WTB

  • 3887 Posts
  • 947 Reply Likes
AS I thought, you really wanted to see what response you would get from your comments. I was interested in what you said and some of your comments are confusing, almost as if you don't really own a 6400.

I am not argueing with you, just trying to understand your thinking behind your opinions.

I know you did not say great,,, I asked what radios do you consider have great  ergonomics? you didn't answer.

Why I find that interesting because the front controls on the M models are about the cleanest and well layed out compared to any readio.

Some of the biggest contesters use Flex radio. And many very serious CW operators give Flex high marks for CW.

Anyways thank you for your comments, very ineresting opinions.
Photo of Leo Nessing

Leo Nessing

  • 36 Posts
  • 8 Reply Likes
I am baffled by your comment.  If you have really read my response on ergonomics you might understand what I am stating. I am not going to get involved in the battle of the BRANDS.

 Again the basic premises of this post  is that Flex advertises the 6400M/6600M as stand alone platforms and this is not really the case.

I agree that the Flex has a clean layout on the front panel and how dare I suggest that there should be ugly ports for connecting accessories like other radios.

I would not have purchased my 6400M if I didn't think it was very good radio and as I have stated many times,  I enjoy using it.  I guess you haven't look at my QRZ page to make a comment that I really don't seem to own a Flex.   Very Defensive!
Leo NK8L
Photo of Burch - K4QXX

Burch - K4QXX

  • 531 Posts
  • 130 Reply Likes
I am confused by your comment that the 6400M/6600M are not stand alone platforms because they don't have a built in clock or CW decode.  I have several radios that don't have these functions but they are certainly "stand alone".  I can turn them on and work other stations without the use of a computer or any other hardware (except for an antenna, coax and power supply).  Are you saying you can't do this with your 6400M?
Photo of Leo Nessing

Leo Nessing

  • 36 Posts
  • 8 Reply Likes
This class of radio $3k to $4k should be able to match what the competition is offering as standard operational software.
I also have a radio without CW decode and no clock, A 1974 SWAN 700CX.  I have recently had a newer Kenwood and Icom in the shack and of course my Elecraft all of which have clocks and  CW decoders except for the Icom and Yaesu has the decoder built in. I guess the competition just doesn't understand HAMS by putting these in their radios.
Yes I just turn on the 6400M and use it  with the powered computer speakers attached.  Why isn't there an amplifier built in the radio so standard speakers can be used?
Much of what I have stated in this post has been covered in QST review and other independent reviews.
Enough time has been spent on this subject.  
Leo NK8L
Photo of Ted  VE3TRQ

Ted VE3TRQ

  • 573 Posts
  • 203 Reply Likes
If you are serious about CW, a decoder in the radio does not add much to your operating experience. What you really want is high-end capabilities available with cwskimmer and a contest logger / macro facility - and those demand a computer, you can’t run those from the radio alone. The same applies to psk31 and rtty - the facilities you get in the radio firmware are not really all that helpful - and the size of the display and what you can see on the K3 are not adequate, and not even available if you are actually using the second vfo (the decodes show up on the VFO B display).

I own both Elecraft and Flex gear - the built-in decode does nothing for me, although I will concede it may help others in some way. I will also concede that if operating without a computer, it is possible to do basic RTTY on a K3 by using a Morse key, but to do more requires a P3 Panadapter with VGA card and a keyboard - not exactly portable, so you may as well have a computer along.
Photo of Steve K9ZW

Steve K9ZW, Elmer

  • 1553 Posts
  • 768 Reply Likes
The Feature set of the 6400M is rich enough that people are opening them wallets to buy.  

With the amount of reviews and information out one's decision making can be handled well in advance of any purchase.  

If a clock and CW decoder are significant barriers to a new rig working in your shack, then your choices are to not select from radios that lack these features or figure a way around what you feel are shortcomings.  

I tend to do a matrix where I evaluate different equipment options when I am making a purchase decision.  In complex buys it is useful to score the desirability of each option.

Some options are go/no-go - the potential gear HAS to have the feature to be included in further consideration. In some methodologies these are termed "needs." 

The rest make working through selection choices better defined by evaluating what some methodologies term as "wants."

It appears that neither the lack of a clock or a CW decoder ruled out buying the 6400M on the basis of not meeting "needs" and is irksome if your perceived "wants" favor these features.

Personally I am all for future version of SmartSDR, especially the M-model/Maestro-centric SmartSDR for Maestro, to include more regular shack functions.  That desire I am sure is tempered by the available hardware resources in the M-Model/Maestro embedded system.  Unlike the old 5000C which included a full PC within the radio, the M-Model/Maestro have an OEM IO/Touchscreen Unit that may be already largely utilized with its intended purpose.

Here I am guessing, as for GPSDO equipped radios accurate UTC time may just need to be presented in the GUI.  Doing localizations may be more involved.  

Decoders expect a lot more resources and may be contraindicated by the available hardware resources after doing the rest of SmartSDR.

My present personal solution is to run a Laptop or Tablet alongside.  This gives me a decent platform to running logging, digital and other shack tasks.  Less elegant than an all-in-one solution, but then I hadn't expected either my Maestro's or my 6600M to have enough accessible hardware/software excess to handle the things I wanted to do.

YMMV but as of my writing those are the facts - in March of 2019 SmartSDR for Maestro/M-Model doesn't have a clock or a CW decoder.  

73

Steve

Photo of Bill -VA3WTB

Bill -VA3WTB

  • 3887 Posts
  • 947 Reply Likes
This has been a nice tribute to Flex, Thanks again Leo. This shows that even with any short comings of the 6400 it is still one of the best.

I hope you continue to enjoy it....
Photo of Leo Nessing

Leo Nessing

  • 36 Posts
  • 8 Reply Likes
I also made the decision to buy the 6400M based on the complete features of the radio. Even though I would like to see certain features added, the radio is fun to operate.  The clincher for me was the way AGCT-(What I call Flex's secret weapon against noise) helps to eliminate the serious local noise problem that I have.
The rig is almost FM full quitting and signal just jump out.
This my last comment on this thread.
Thanks to all, Leo NK8L 
Photo of John N6NTM

John N6NTM

  • 14 Posts
  • 15 Reply Likes
Amen........
Photo of Bob

Bob

  • 32 Posts
  • 6 Reply Likes
When I received my Flex 6400 M I also missed the clock and the front connections for the mic, key, phone, etc. I quickly realized that it was only because it was what I was familiar with. I now really like the rear connection jacks because the front is much cleaner sans all the wires all over the place that actually always annoyed me with my other radios. I also have QRZ or other software running UTC and I intend to get a UTC clock in the shack just for aesthetics so that also quickly became a non issue. I am sure that adding all these features would make the radio more expensive (but maybe not) I too am getting great audio reports from the hand mic and great signal reports running barefoot. Plus the fact that the rcv audio and filtering are superb the 6400M is giving me all that I could ask for. The only question I ask myself is whether I should have sprung for the 6600M for the increased operating versatility. That said I love this radio.

Bob W1AGC
Photo of Gene Duprey

Gene Duprey

  • 120 Posts
  • 16 Reply Likes
The other night I found the the UTC time on QRZ was 1 hour off, using WWV as a quick check.
Photo of Rick Hadley - W0FG

Rick Hadley - W0FG

  • 600 Posts
  • 130 Reply Likes
The computers in my shack are set to UTC. For local time I have this unique invention I wear on my wrist called a “watch”.
Photo of Roger,  W6VZV

Roger, W6VZV

  • 263 Posts
  • 120 Reply Likes
I know what you mean, Bob, about the 6400 versus 6600.  I am at that stage in my life where I can own any radio I want.  I went for the 6400 because I have no prospect of having a big antenna farm, and I only work single operator.  And above all, I like simplicity.  The 6400M is plenty complex for my blood, grin.  6600 is a nice rig though.  I have been uniformly pleased with my 6400M.  It is the first radio I've ever had that doesn't have something about it that irritates me.

de Roger W6VZV
Photo of Bob

Bob

  • 32 Posts
  • 6 Reply Likes
I agree Roger. Plenty enough radio for me too. I could spend a lot of time getting to know all it can do which is part of the fun, right? 
Photo of Doug

Doug

  • 150 Posts
  • 55 Reply Likes
Owning a Flex 6400M has been a real problem for me. It has taken all the lust out of my life for another radio. What am I going to do now, no longer do I look at the HRO catalog and wish I had this or that. Yep I have been ruined for life !!  BUT WAIT what about this new Flex-2400M that is the title of this thread. Maybe I can get all the specs on it (.)(.)
(Edited)
Photo of Bill -VA3WTB

Bill -VA3WTB

  • 3886 Posts
  • 947 Reply Likes
Vapor ware?
Photo of Burt Fisher

Burt Fisher

  • 1241 Posts
  • 479 Reply Likes
The 2400M is the 6400M minus the bugs.
Photo of John N6NTM

John N6NTM

  • 14 Posts
  • 15 Reply Likes
Yes ....as with I.....finally H A P P Y......not a single complaint.....If I could only get the wife to agree to a FLEX tattoo for herself......6400 the last radio I’ll ever need......that why I went with the 6600.....just to make sure.....THANK YOU FLEX....