New COM philosophy

  • 1
  • Problem
  • Updated 3 years ago
I would like to ask a question to the staff, personally own a UltraBeam and an amplifier expert 1.3k necessotabo therefore both are connected to the CAT with the 1.5 version lrecedente they tuned in to all the slice just abilitavo TX on the slice you want by using a single COM now this has become impossible because now there is close correlation COM slice this seems like a step back or there is a way and I have not realized? thank you
Photo of Frank, IZ7AUH/AK1CQ

Frank, IZ7AUH/AK1CQ

  • 175 Posts
  • 6 Reply Likes

Posted 3 years ago

  • 1
Photo of Sergey, R5AU

Sergey, R5AU

  • 846 Posts
  • 111 Reply Likes
Frank if i get properly  with PA and Ultrabeam you need follow with active TX slice - DDutil realize it.
or?
Photo of Frank, IZ7AUH/AK1CQ

Frank, IZ7AUH/AK1CQ

  • 175 Posts
  • 6 Reply Likes
Hi Sergey, I try when I come back at home....
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9152 Posts
  • 3478 Reply Likes
There is a feature request for a new type of CAT port that tracks the transmit slice.  Unfortunately it did not make the cut for 1.6.17
Photo of Frank, IZ7AUH/AK1CQ

Frank, IZ7AUH/AK1CQ

  • 175 Posts
  • 6 Reply Likes
thanks Tim then in a next update we will find again this possibility? omnirig, software much used on many software cwskimmer included, no longer functions properly in functionality split with more active slice for example, would be enough to put the possibility of a COM that reads data on all active slice specifically on what to which is enabled TX at that time
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9152 Posts
  • 3478 Reply Likes
Are you using the smartsdr.in file for OmniRig?
Photo of Frank, IZ7AUH/AK1CQ

Frank, IZ7AUH/AK1CQ

  • 175 Posts
  • 6 Reply Likes
Yes always use this file...
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9152 Posts
  • 3478 Reply Likes
I will need to test the smartsdr.ini file and see if it needs to be modified.