New Alpha 9500 with Flex 67000

  • 1
  • Question
  • Updated 5 years ago
  • Answered
New Alpha 9500 amp with my Flex 6700. Need info on settings for transmit. Using DDUtil but I know there are some Transmit Settings in SSDR I need to adjust. Am confused about how to adjust.
Thanx in advance.

Photo of Mike - N1MD

Mike - N1MD

  • 93 Posts
  • 3 Reply Likes

Posted 5 years ago

  • 1
Photo of Steve W6SDM

Steve W6SDM

  • 625 Posts
  • 283 Reply Likes
Alpha 9500?  I am sooooo jealous!

Of course, you need to set the power output on the 6700.  I use the Auto Drive in DDUtil.  I set each band for 25 watts and then adjust up from there. Of course, you need to set the serial port and enable it under amps.
Photo of Mack McCormick

Mack McCormick, Elmer

  • 523 Posts
  • 179 Reply Likes
I use an Alpha 9500 and Acom 2000. For the 9500 it's as simple as selecting the com port in DDUtil that you have connected to the 9500. Use DDUtil Autodrive to set the power level for each band. That's it!


Flex Alpha Tester
Photo of Larry Loen  WO7R

Larry Loen WO7R

  • 224 Posts
  • 33 Reply Likes
Steve (W6SDM) has it about right.  Start at 25 watts and then see.  It also is partly dependent on what settings you have for SSB or general gain (e.g. for DAX when doing RTTY).