Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Need to control Rotor with two different programs.

Gene - K3GC
Gene - K3GC Member ✭✭
edited June 2020 in SmartSDR CAT
My rotor is presently controlled by DXView using com three ( hardware com port).  i would like to also use PST rotor to control it.
I know this is relatively simple except that I exceeded my brains use-by date.  I think I understand that this can be accomplished with DDUtil but I can't for the life of me figure out how.
If some kind soul would explain how to do this using very simple language I would be eternally grateful.
Thanks,
Gene K3GC

Answers

  • Walt - KZ1F
    Walt - KZ1F Member ✭✭
    edited November 2016
    I believe having two programs attach to the same com device will prove problematic. Even something as simple as having the Elecraft test/configure programs for the KAT-500 and KPA-500, At least one of them doesn't cleanly close the com device after and when trying to open it with DDUtils there is a device in use exception thrown by Windows. While I am sure you could configure either to control it I think you find one or the other, not both.
    In the above case I have to physically close the program to free the com port.

    What are you seeing when you try to configure DDUtil to control it?

    walt - kz1f
  • David Decoons, wo2x
    David Decoons, wo2x Member, Super Elmer Moderator
    edited June 2020
    Hi Gene,

    I'd suggest joining the DDUtil Yahoo group. Steve, K5FR, is very active there and can give guidance on what you are trying to accomplish.

    Also check out the DDUtil WiKi. There is a section on sharing rotor data between programs.
    http://k5fr.com/ddutilwiki/index.php?title=How_To#RCP_Rotor_Pass_Thru

    Dave, wo2x
  • KY6LA_Howard
    KY6LA_Howard Member ✭✭✭
    edited January 2017
    Agree 100% with David

    I normally run several programs at the same time controlling the rotor via RCP in DDUTIL


    Why oh why do they schedule contests when my XYL is home...

  • KY6LA_Howard
    KY6LA_Howard Member ✭✭✭
    edited January 2017
    Taking a break from WPX Contest.. XYL is going to leave me to it finally tonite



    1.  I set up my rotor to work on COM1 (a physical Port)

    Use the Other Tab in Setup

    image

    I usually list the connections to the Rotor Pots on the Ports Tab

    In this case the Pair COM 8-18 is connected to HRD Rotor and/or Writelog (I never use HRD for Contests)

    and the Pair COM 9-19 for MIXW

    However the rotor can be connected to any program

    What DDUTIL does is connects the Physical COM1 port to Virtual COM 18, 19 or whatever ports you want.


    image

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.