N4PY Software now supports the Behringer CMD Micro DJ Controller

  • 1
  • Question
  • Updated 3 years ago
I now have full support in Pegasus Plus Beta for the Behringer CMD Micro 
DJ Controller.  This device has 10 knobs and 20 buttons offering 
ultimate knob control for your radio.

All the knobs and buttons are fully user definable.  Right now this is 
available in Beta form for Pegasus Plus on my test page.  It is in 
version 4.23E or later.

These devices are a great bargain and can be found for around $60.
Photo of Carl Moreschi

Carl Moreschi

  • 39 Posts
  • 5 Reply Likes

Posted 3 years ago

  • 1
Photo of James Del Principe

James Del Principe

  • 304 Posts
  • 45 Reply Likes
Carl, does this work with SSDR? at what release?   I assume that one still uses their own computer for video. How bad is latency in control? How does one get the SW to interface?   Any further information?     Many Thanks, Jim      KD1I
Photo of Carl Moreschi

Carl Moreschi

  • 39 Posts
  • 5 Reply Likes
Yes, this runs in conjunction with SmartSDR.  My N4PY Pegasus Plus connects to the Flex 6000 radios.  There's just one setting you turn on in Pegasus Plus to hook up the DJ controller.  And Pegasus Plus connects to the Flex 6000 radios radios by simply selecting that radio type.

All buttons on the DJ controller can be configured by you to over 60 different functions.

You can download and install Pegasus Plus from my webpage.  This function is only on my Test page in Beta so once on my home page, select the test page from my "More" menu.  Then download and install n4py423E.exe.  It will run for 10 days without a password.

Carl N4PY