N1MM CW DDutil and PowerSDR

  • 1
  • Problem
  • Updated 4 years ago
  • Solved
Can someone post details of your set-up for using N1MM in CW contests using PowerSDR 2.7.2 with DDutil involved (so I can also add Cw Skimmer).  It is normally easy to set up PowerSDR, DDutil and other applications using DDutil's RCPs but I can't get N1MM to actually send CW.  I had it working fine in earlier versions of PowerSDR .  I suspect I am screwing up the PowerSDR PTT port settings and the corresponding area in N1MM configuration area . 
Photo of Andrew O'Brien

Andrew O'Brien

  • 376 Posts
  • 42 Reply Likes

Posted 4 years ago

  • 1
Photo of Stan - VA7NF

Stan - VA7NF

  • 391 Posts
  • 82 Reply Likes

<edit>  Apologies, I answered for SmartSDR - Stan

At this moment, without using some external device, the 6x00 will not process CW via a COM port.  It will trigger the PTT but will not produce RF output. 

I'm waiting for a release beyond current V1.1.3 before completing N1MM automation.  Wishfully well before FD 2014 but that doesn't leave much time after 1.2 potential release.

(Edited)
Photo of Andrew O'Brien

Andrew O'Brien

  • 376 Posts
  • 42 Reply Likes
Had me worried for a moment, I assume PowerSDR can do it.
Photo of Andrew O'Brien

Andrew O'Brien

  • 376 Posts
  • 42 Reply Likes
I have the issue solved now. 
Photo of Andrew O'Brien

Andrew O'Brien

  • 376 Posts
  • 42 Reply Likes
A video showing how i set mine up https://www.youtube.com/watch?v=jBYGZLbP1xA