N1MM+ tune option (CTL+T) does not work with CAT WinKeyer

  • 1
  • Question
  • Updated 2 years ago
  • Answered

Finally a way to remove the wire from computer to 6000 for N1MM CW keying.  Two problems were encountered:

First was user RTFM re engaging WinKeyer in CAT.  No matter what I did nothing would key RF but would trigger PTT with no problem.  Once I found the hidden "Advanced" and the WinKeyer setting this problem went away.

Second my testing method was to use CTL+T to trigger tune.  Eventually I found the CW function keys worked properly.  Tune still does not work.  Another user error?

SSDR "TUNE" is a working option; just not as convenient.

Photo of Stan - VA7NF

Stan - VA7NF

  • 411 Posts
  • 90 Reply Likes

Posted 2 years ago

  • 1
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9130 Posts
  • 3454 Reply Likes
Official Response
"Second my testing method was to use CTL+T to trigger tune.  Eventually I found the CW function keys worked properly.  Tune still does not work.  Another user error?"

This feature is not supported via CAT.  But as Al said it is supported by the radio API, however N1MM does not use the API to communicate with the radio.
(Edited)