N1MM+ audio playback pops

  • 1
  • Problem
  • Updated 3 years ago
Well I am using the latest version of N1MM+ and I can get audio to record and playback. The problem is on playback when listening via monitor the audio is horrible. Pops and snaps. I'm wondering what I have set up incorrectly. I am using a 6500
Photo of Mike

Mike

  • 70 Posts
  • 3 Reply Likes

Posted 3 years ago

  • 1
Photo of Ken - NM9P

Ken - NM9P, Elmer

  • 4025 Posts
  • 1248 Reply Likes
Sometimes I have gotten distortion with N1MM+ and DAX that was solved by closing Dax and reopening it.

If that doesn't help, check your various Dax levels to make sure you are not overdriving anything on record or playback.

Those are the first things I would check.
Photo of Mike

Mike

  • 70 Posts
  • 3 Reply Likes
checked all those. Tried recording at a lower level still getting pops in the playback recording. I am using the antlion modmic too.
Photo of Mike

Mike

  • 70 Posts
  • 3 Reply Likes
I substituted a dynamic mic I have and the same pops/crackles are in the playback audio. I'm stumped