N1MM+ and CW Skimmer - again

  • 1
  • Question
  • Updated 2 months ago
I'm still trying to get Skimmer to populate the entry box in N1MM+. The calls appear on my 6500 panadapter fine and when I click on them the radio frequency changes as expected. However, the calls do not populate the N1MM+ entry box. I am sure this is a configuration issue but don't know what it might be. I am using Slicemaster that opens the skimmer application, and SDR bridge. Older posts indicate this is not possible BUT recent developments may have changed those posts. Any help getting the call to populate into N1MM+?








Related Conversations Photo of FRED  W9TB

COVER 6600M
  • 1
  • 2

  • Question
  • Answered
Photo of Gary Johnson

6600M Manual
  • 1
  • 3

  • Question
  • Answered
Photo of Barry Simpson

Shipping date for 6600M
  • 1
  • 7

  • Question
  • Answered
Photo of Robert Lonn

Picture of the rear of the 6600M
  • 1
  • 5

  • Question
  • Answered
Photo of elan

some qustion on the 6600m
  • 1
  • 3

  • Question
  • Answered

Related Categories


Photo of W9ILY

W9ILY

  • 52 Posts
  • 4 Reply Likes

Posted 2 months ago

  • 1
Photo of Andy - KU7T

Andy - KU7T

  • 177 Posts
  • 17 Reply Likes
Hi,

Getting something into N1MM+ (bandmap spot, AMQ window spot, EntryWindow call stack box, Spectrum window spot) requires it to come through the normal telnet feed. Have you connected to a telnet feed with the telnet window that provides these spots?

To get these spots into a feed you have multiple options:
- post the spots to the RBN, then connect to any retail clusters that include RBN spots, or
- do not post to RBN and connect your N1MM+ telnet window directly to your local feed.  That local feed could come from CW Skimmer, Slicemaster aggregator, RBN aggregator or some other software like WinTelnetX...

73
Andy
KU7T