Flex 6700 running Smart SDR 184.108.40.206 on Windows 10 MS Surface Pro 1 with two additional monitors. 20 meter pan running with receiver tuned to 14.070 DIGU working perfectly into DM-780. Click to start new pan opens a 2 meter pan. This is expected as a 2 meter pan had run earlier. But the existing 20 meter pan switches to 2 meters. The result is a pair of 2 meter pans. The new one has a receiver placed in 2 meters as expected from previous use. What had been the 20 meter pan is now changed to 2 meters with a <A pointing to 14.070. Clicking on the <A jumps both pans to 20 meters. Prior to the jump to 20 the digital signals had stopped running in DM-780 and the FM repeater signals were coming through. Now the digital signals return to the DM-780 and the FM signals are gone. When 20 is thus operating there is a B> in the second window. Clicking on this returns to both windows being on 2 meters and the repeater signals again being heard, but the digital signal is now gone. Did I miss a footnote somewhere? Is this correct? What's happening?