Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

my new 6400m will not change ant ports stuck on number 1 ? !? all tx is from port 1, screen shows

my new 6400m will not change ant ports stuck on number 1 ? what have i done wrong !? all tx is from port 1, screen shows ant 2 for tx but rf comes from port1

Answers

  • bobby
    bobby Member ✭✭
    edited January 2019
    Review the profiles section of the manual antenna ports are persistance and profile related also by band so without added info provided you need to do some reading, however you also need to make sure you have a dummy load on both ports and be sure your power is set to less than 10 watts till you figure out how to operate your rig to prevent damage which if done by the user is not covered under warranty due to mis operation.
  • Dudley  WA5QPZ
    Dudley WA5QPZ Member ✭✭✭
    edited March 2020
    Wayne, Make sure you are changing the RED, TX , in the Slice window. Change the TX antenna there, also make sure the Slice is unlocked.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.