Mox button Dont work

  • 1
  • Problem
  • Updated 1 year ago
  • Not a Problem
Smart SDR V2.0.
I tried to use the MOX button a couple of times while not in remote cause I'm sitting at my desk right next to the Flex and I just clicked on the MOX button and talked into the mic and well nothing happen. It keyed but no Audio. So I hit the foot switch and everything worked fine. So I was wondering if anybody had that problem also. Or has anybody even tried it. Cause most of the time I wouldnt even bother with it. Not sure if its going to work in a remote setting or not. 

Thanks
Jay
W0JAY
Photo of Jay Spaulding

Jay Spaulding

  • 66 Posts
  • 3 Reply Likes

Posted 2 years ago

  • 1
Photo of Larry - W8LLL

Larry - W8LLL

  • 532 Posts
  • 116 Reply Likes
Dax isn't on is it, if it is it will act exactly as you describe.
(Edited)
Photo of Richard Heggemeyer

Richard Heggemeyer

  • 5 Posts
  • 0 Reply Likes
DAX is turned off
Photo of Richard Heggemeyer

Richard Heggemeyer

  • 5 Posts
  • 0 Reply Likes
I am using 5000A mox will not work when VAC 1 & VAC 2 are turned on and I am working remotely. Dax is turned off
(Edited)
Photo of Doug Hall

Doug Hall

  • 216 Posts
  • 60 Reply Likes
I just tried it here on 20m SSB and it works. Clicked on MOX, spoke into the mic, got power out. This is with 2.0.17 on a Flex 6300.
73,
Doug K4DSP
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9198 Posts
  • 3558 Reply Likes
Official Response
Sounds like DAX is enabled for transmit.
Photo of Norm - W7CK

Norm - W7CK

  • 759 Posts
  • 164 Reply Likes
For some strange reason my MOX doesn't work when using 2m FM.  It will key the transmitter but I get no audio out of the mic.  I've tried everything but still no go.   This was also a problem on the previous 2 versions of SmartSDR.  It is not isolated to v2.x.  No DAX enabled.

Norm - W7CK
(Edited)
Photo of Doug Hall

Doug Hall

  • 216 Posts
  • 60 Reply Likes
Norm,
I just tested here with my 6300 and 2M transverter. No problems transmitting mic audio when keyed via MOX or PTT on FM.
73,
Doug K4DSP
Photo of Jay Spaulding

Jay Spaulding

  • 66 Posts
  • 3 Reply Likes
Thats what it was.. I was running digital wsjt and never turned it off. But I can hit the foot switch and it work No problem. 

Thanks guys. 
73
Photo of Ken - NM9P

Ken - NM9P

  • 4239 Posts
  • 1351 Reply Likes
If you save separate Mic Profiles for FM, SSB, DigiU, etc, then you won't need to remember to turn Dax on and off whenever you change bands. The rig allows you to link a profile with a mode. It remembers the last profile you used with that mode.
Photo of Richard Heggemeyer

Richard Heggemeyer

  • 5 Posts
  • 0 Reply Likes
I have the 5000A, Mox will work but if I turn on VAC 1 & VAC 2 when I am working remote when I use the Mox button to transmit it will not transmit when Vox 1 is turned on