Mouse click combo makes TNF disappear

  • 1
  • Problem
  • Updated 3 years ago
  • Acknowledged
  • (Edited)
So I found this problem. Not a big issue but might want to put it in the bug tracker.

If you have an active TNF and you right click on it you get a pop up menu where you can select the depth of the TNF or if you want to remove, remember, etc.

If you move up away from that menu and the mouse pointer remains in the yellow area of the TNF and you left click on it, it disappears. If you do the same thing but the mouse pointer is outside of the yellow zone of the TNF and you left click then the behavior is the normal one, the TNF remains and the menu disappears.

If you have 2 TNFs and you right click on one and then move the mouse and left click on the other outside the popup menu the second TNF will close.

You can do this even if the TNF is on a different panadapter slice.

It's like the left click defaults to remove TNF when you move away from the TNF menu but stay in the yellow area of an active TNF. You get this behavior even if you have greyed out TNFs. As long as you left click on the TNF column.
Photo of EA4GLI - 8P9EH - Salvador

EA4GLI - 8P9EH - Salvador

  • 1730 Posts
  • 530 Reply Likes

Posted 3 years ago

  • 1
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9052 Posts
  • 3435 Reply Likes
Official Response
I have entered this problem report into our bug tracker for additional investigation. Thank you for the defect report.