mic selected bug?

  • 1
  • Question
  • Updated 8 months ago

Please advise if your flex does same.

6600  V2.1.33  win 7

I select "Mic" and transmit audio is fine and level meter functions as should since I have it enabled under   settings    radio setup      phone/cw.

If I select PC the meter no longer works but transmit audio is still fine.

Photo of K5ROX

K5ROX

  • 89 Posts
  • 17 Reply Likes

Posted 8 months ago

  • 1
Photo of K5ROX

K5ROX

  • 89 Posts
  • 17 Reply Likes
anyone?
Photo of Jim Osterling

Jim Osterling

  • 45 Posts
  • 1 Reply Like
I'm working with Flex on a problem on pc input selection that doesn't appear when mic selected but not concerning the meter. An audio problem on receive and have no idea if they are or could be related.......
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9152 Posts
  • 3478 Reply Likes
When using PC Audio, we make a Windows API call to read the mic level and then report that back on the SMartSDR console.  If the API call to your sound card fails, we do not get the data.  You may try updating your sound card drivers.  It might help.  Or not.
Photo of K5ROX

K5ROX

  • 89 Posts
  • 17 Reply Likes
Tim, If "PC" is selected for input audio and a microphone is connected to the "Mic" input and you have transmit audio, it has to be a bug does it not?


My PC has no mic except for wireless headphone and there deffinately off  So if "PC" is selected I should have no audio on transmit from a microphone plugged into "Mic" on the back.
(Edited)