Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR, Power Genius, Tuner Genius and Antenna Genius Software?

SmartSDR v3.7.4 and the SmartSDR v3.7.4 Release Notes | SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes
SmartSDR v1.12.1 and the SmartSDR v1.12.1 Release Notes
Power Genius XL Utility v3.8.8 and the Power Genius XL Release Notes v3.8.8
Tuner Genius XL Utility v1.2.11 and the Tuner Genius XL Release Notes v1.2.11
Antenna Genius Utility v4.1.8
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Mic bias selection

Stewart Rolfe
Stewart Rolfe Member
edited June 2018 in FLEX-6000 Signature Series
On my Flex 6300 there is 5v on pin 2 of the front mic connector irrespective of whether the 'BIAS' button on the Transmit is window is selected or not - is this normal?

Answers

  • Jim K4JAF
    Jim K4JAF Member ✭✭
    edited January 2018
    Yes, Pin 2 is +5 volts, bias turns voltage on pin 1.  73 s Jim K4JAF
  • Stewart Rolfe
    Stewart Rolfe Member
    edited May 2015
    Posting this brought up thread on the SSDR category which appears to answer this...sorry for the qrm - must check the frequency before transmitting.

    73,
    Stew, GW0ETF


  • Greg N8GD
    Greg N8GD Member ✭✭
    edited June 2018
    Actually, the microphone hot lead is on pin 8, according to other posts from Gerald and Tim, W4TME, not pin 1. The bias of 2.97 VDC would thus be applied to pin 8 when activated via the GUI.
  • Jim K4JAF
    Jim K4JAF Member ✭✭
    edited January 2018

    Yes pin 8 is correct Mic pin.  Yaesu (Flex) uses pin 8 not 1. 

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories