Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Memory Display - Frequency Truncation

Nick Shaxted
Nick Shaxted Member
edited October 2018 in SmartSDR for Windows

Using the basic memory channel setting in my Flex-6700, SmartSDR 1.5.1 I notice an error in how it handles frequencies in the shf range. HF and VHF frequency handling appears to be fine, the problem arises when dealing with real radio frequencies ;-).

I suspect the problem may manifest itself with VHF frequencies above 100MHz when inserting down to Hz levels.


Here is a snippet of what is displayed in the Memory Channels for my 3cm memories:-
10m Beacon DL4OGI 28.800.000 OH5TEN ... ... ...
3cm Beacon DL4OGI 10.368.100.000 F1ZAP ... ... ...
3cm Beacon DL4OGI 10.368.100.000 HB9BBD ... ... ...
3cm Beacon DL4OGI 10.368.800.000 PE9GHZ ... ... ...
3cm Beacon DL4OGI 10.369.000.000 ON0GHZ ... ... ...

On the face of it all appears to be fine, except the actual frequencies of the 3cm Beacons have been truncated to the nearest full integer frequency for display. The correct actual frequencies seem to be stored on the 6700 correctly as recalls these memories see the radio tune to the exact frequency.

Therefore what we see is

10m Beacon DL4OGI 28.800.000 OH5TEN ... ... ... Note this is correct

3cm Beacon DL4OGI 10.368.100.000 F1ZAP ... ... ...    should be displayed as 10.368.108.000
3cm Beacon DL4OGI 10.368.100.000 HB9BBD ... ... ... should be displayed as 10.368.064.000
3cm Beacon DL4OGI 10.368.800.000 PE9GHZ ... ... ... should be displayed as 10.368.815.115
3cm Beacon DL4OGI 10.369.000.000 ON0GHZ ... ... ...should be displayed as 10.368.925.000

I assume this type of rounding applies to all frequencies above 1 GHz but have yet to test it.

In summary memory channel frequencies seem to be stored correctly internally, when displayed in the memory channel table they are truncated. I can't work out exactly how the trucation works as it is doesn't appear to be consistent.

To check I loaded FRStack and that also displays the memory channels frequencies in the same truncated way which suggests truncation takes place on the Flex radio side.

regards
Nick dl4ogi

Comments

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited October 2018
    I have entered this problem report into our bug tracker for additional investigation. Thank you for the defect report.
  • Doug - K3TZR
    Doug - K3TZR Member
    edited November 2015
    I observed a similar problem a few months ago. I posted a way to demonstrate the problem but there were no replies to my posting.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.