Maestro - "Max Power" setting is limiting power but display falsely shows PWR above "Max Power" setting

  • 1
  • Problem
  • Updated 5 days ago
  • (Edited)

I was testing the "Max Power" feature, adjustable under the Transmit menu.  I verified that can be violated in Transmit mode in version 2.3.7.41 and the newest version 2.2.9.  "Max power"  now only limits you TUNE level.  Well, the PWR knob will display up to 100watts but the actual "Max Power" still applies.  Max Power is still limited as set in the Transmit menu.

In older versions turning the PWR knob up; the display would stop on the "Max Power" number. 

And I like that better.

So I am calling it a bug and I hope the Flex Team will restore the way Max Power was displayed in earlier versions.

Photo of Steven Linley

Steven Linley

  • 190 Posts
  • 22 Reply Likes

Posted 5 days ago

  • 1
Photo of Ed.G

Ed.G, Software Engineer

  • 88 Posts
  • 20 Reply Likes
Yes, this is a bug. The power will still be limited so there is no danger of putting out too much power. 

This should be fixed in the next release. 
Photo of Steven Linley

Steven Linley

  • 183 Posts
  • 22 Reply Likes
Yes, and Thanks
Photo of Wayne

Wayne

  • 533 Posts
  • 63 Reply Likes
Maybe it means 100 percent of max power limit instead of 100 watts.