Maestro RX RIT Function:

  • 1
  • Problem
  • Updated 3 years ago
  • Acknowledged

I asked this yesterday and deleted the question but I still have not found an answer anywhere else so here we go again.  I'm just learning the Maestro functions so it may well be a setting.

When using the RX RIT feature on Maestro (Ver 1.9.7) I find that the tuning indicator travels to the low side of the TX frequency fine and the TX frequency remains 'marked' on the spectrum display with a vertical red dotted line.  However, if I tune on the high side of the TX frequency the TX marker quickly disappears and I can no longer tell where my TX frequency is.  I believe I should still have the red dotted TX vertical line marker regardless of which side of the TX frequency I tune the RX to.

Using the Maestro with a 6700 and latest firmware updates.

Regards

Larry  k1UO

Photo of K1UO - Larry

K1UO - Larry

  • 886 Posts
  • 135 Reply Likes

Posted 3 years ago

  • 1
Photo of Eric - KE5DTO

Eric - KE5DTO, Official Rep

  • 916 Posts
  • 344 Reply Likes
Official Response
Larry,

Thanks for the report.  This is one we are aware of and is in our system as issue #3842.