Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Keyer audio

Bencher cw paddle stopped producing sound. It was working fine for about a week but when I powered on the radio today it produced no audio. What am I doing wrong?

Comments

  • Rick Hadley - W0FG
    Rick Hadley - W0FG Member ✭✭
    edited January 2018
    Sidetone button turned off perhaps, or the sidetone slider got turned down to 0.
  • James Madden
    James Madden Member
    edited May 2018
    Thanks. Where do I find this adjustment?
  • James Madden
    James Madden Member
    edited May 2018
    Ps note to documentors there is a reference in the documentation to this setting but no information where it can be found.
  • Rick Hadley - W0FG
    Rick Hadley - W0FG Member ✭✭
    edited January 2018
    Right below the speed setting slider and above the Breakin & Iambic buttons on the P/CW section.  If you're not seeing that, you may just have your mode set to something other than CW, in which case you'll not be able to transmit CW or hear the sidetone.

  • James Madden
    James Madden Member
    edited May 2018
    Rick, thank you. The side tone was set to 80. I lowered it to 70 and raised it back up and the paddle began to work

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.